Wireless Joint

Does this still work if so can I use it

Rich's method turns an iPhone's limited hotspot data into unlimited without a router.
Since this script sets a custom TTL value internally, the iPhone must be jail-broken.

Without jail-breaking/rooting, you can connect any iPhone or Android to a Windows ...

I have... don't know how to do anything about it 😞

There's nothing you can do about the hard throttle, unlike hotspot throttle which can usually be bypassed via TTL.
Switch to another carrier which has a higher monthly data limit, they all do, some lower some higher.
It's the old adage "You ...

As the title says, I'd to modify the original list of CA on my netgear m1, I need band 1&3 to be added in that list to get 4g+. Thanks.

While you can modify CA bands on the router, the actual usage depends on the carrier.
Even if you enable all the possible CA combinations, the actual usage is ...

Klaus4 wrote: Thu Nov 28, 2024 10:37 pm The deskjet 340 is working fine under Win 10 so why schoud I buy a new one even i am using three times in a year.

Would that Trendnet adapter work with WPA but not WPA2?
Honestly WEP is fine too, it's just a printer, there's not much to hack on it. lol

Gosh, I haven't uttered the word "Centronics" since the early 90's. heh
You can't add WPA2 unless the manufacturer released a firmware update to support WPA2.
Being an old tech, there weren't many Centronics wireless adapters made back then.
WEP is fine for print server, it's not like you're ...

Greetings.

I am trying to set up a home made LTE router, since I have one laying around, and need something to use my time on ;)
The only roadblock I am facing, is that I am considering buying a Huawei Brovi E3372-325 4G usb stick, but it seems that this has the HiLink firmware on it. For the ...

I had worked on getting a legit contract from Verizon for a year, we had the details ironed out and they were going to sign in a week we were going to be partners then all the sudden they did a 180 the next week they implemented into their system to only allow 3 MDN changes per cycle and told me ...

I am the owner of autoverifyme.com the original sms verification service, we used real USA numbers not virtual numbers, it became to difficult to get numbers for us so we took it down. we still have the tool though. virtual numbers would never work to verify most of the services our clients needed ...

Hi, I also agree that it probably won't help at all to try to tinker more, all core HW Offload features are enabled.

I think my best bet is to upgrade to a full powered box with a similar modem.

Not sure about M6 since I don't use one, but in GoldenOrb, there's a settings under Network ...

Hi, Thanks for this. It works well, the only thing I have noticed is the performance of the modem internally is very much faster than any option of sharing that connection out.
I am getting around 700Mbps iperf3 on the device itself to my VPS on WAN, but only around 120-150 when connected via ...

$24.88 new plan, non deprioritized, unlimited high speed data plan that took over the $25 30 gig plan.

Look, currently no US mobile carrier is giving truly unlimited data at full network speed, especially at 25 bucks per month.
This new plan is either limited to thirty gigs per month, then ...

Theie highest plan at $25 only includes 30 gigs/mnonth, most people blow through that in a couple of day.
For 50 bucks with other carriers you could get at least 300 gigs.

$24.88 new plan, non deprioritized, unlimited high speed data plan that took over the $25 30 gig plan.

Well, on ...

Im thinking about trying Walmarts Mobile X non deprioritized 5G UWB plan from Verizon. It's under $25 a month. Has anyone tried this yet on their MR6500?

Theie highest plan at $25 only includes 30 gigs/mnonth, most people blow through that in a couple of day.
For 50 bucks with other carriers ...

I have problem with this module using it in a Openwrt VM running on Proxmox. The module works at first boot, but if I turn off VM and restart, the module doesn't work. I get failed to power up MHI controller error -110, and I can't see the wwan0 port in /dev. If I turn off and restart again the VM ...

So flashing the modem didn't work outright.

Recreating the steps I did this:

AT+CGDCONT=1;+CGDCONT=2;+CGDCONT=3;+CGDCONT=4;+CGDCONT=5;+CGDCONT=6;+CGDCONT=7;+CGDCONT=8;+CGDCONT=9;+CGDCONT=10;+CFUN=0;+CFUN=1

Then I flashed the modem firmware via QFirehose. Then reboot. And bam, connected QMI ...

Mr.Taco wrote: Thu Oct 31, 2024 6:22 pm got connected via AT+QCFG="usbnet",1

* I.e. showed carrier in network status via ethernet mode

So you're back online via ethernet and WiFi?
It may have been just a modem software/setting corruption.

I'm not sure if I understand. The router itself never went down, just the ability for the modem to connect. When it did lose the connection it had lost it's IPv4 and IPv6 addesses and the typical reboots didn't resolve the issue. Unless you mean a certain site cause the connection to go down (CDN ...

Looks like your modem is not connecting to the network, There could be a number of reasons for that, including a router failure, modem, and carrier/network issue. The first step is to test the SIM card in a phone to make sure you can call and access the web. If it's not working in a phone then it's ...

If you like playing and are looking for another solution you might look into an OMR (OpenMPTCPRouter) setup rather than load balancing? That should increase your overall upload/download performance. It does have its downsides but worth it if you like playing around IMO.

Let's face it ...

Didneywhorl wrote: Tue Oct 22, 2024 10:11 am Use Google Gemini, or similar service, to find at least a relatively close list pretty quickly: https://g.co/gemini/share/58834f80b096

I've notices that AI's are basically nothing more than web-scrapers pulling info from Wikipedia verbatim and even the Wireless Joint. lol

An ATT prepaid sim will only work in the US, there's no international roaming unless you sign up on a postpaid plan.
Besides, when roaming it will use one of your local carrier's towers which you could test with a local prepaid sim.

If trying to force SA mode only, the tower may not support that alone and falls back to NSA which is completely normal till they go full SA only.
One of the best ways of testing a tower, is by inserting the SIM into a newer iPhone like 12 or 13 which contains both SA/NSA including mmWave.
Did you ...

Klaus4 wrote: Wed Oct 16, 2024 1:47 pm [MarkVincent] : Yes you need to coordinate it to the person who sold you the device

"Yes you need to coordinate it to the person who sold you the device" Ba-ha-ha, a typical big company response by some clueless overseas customer service who barely speaks English. smh

Well, just use one profile or just overwrite the first one. heh

Yes, thanks, I know. I've used eBay many times.

However, if I buy through them, I have no way of knowing if the battery is genuine (and therefore safe) or in what year it was made.

By the way: Does anyone know if the date code is on the battery, and how to interpret it, if so?

The price is ...

Hi all:

I need a new battery for my MR1100. Does anyone know a source in Canada for genuine W-10a batteries? Netgear USA doesn't ship these to Canada, and if I were to use a reshipping service, the final price would climb very high.

Anyone?

Try eBay both US and Canadian, or AliExpress both ...

It's usually a simple solution to an elusive problem.
I always disable IPv6 both on the router's modem and LAN/WiFi interfaces, and the pc (just don't like IPv6 for some reason lol).
Then I set the DNS to 1.1.1.1 and 8.8.8.8 on both the router and pc's LAN/WiFi interfaces for better performance.
In ...

Rich Hathaway wrote: Sat Oct 05, 2024 8:11 am I do not use telegram, my email and skype are all over the web I am not hard to find. you can get it from my advert here in this forum in the marketplace section.

Telegram is full of scammers, I'm hearing horror stories. lol

@ BillA
1000, That's good speed right there, yes its tmobile in the vid.

OS2 they have on these devices that is so dumbed down and having throttle built in in so many places now they rob us of so much of our speed its aggravating

I've seen speed burst of up to 2,000Mbps on Verizon's mmWave ...

Ok so these have been unlocked, flashed and dethrottled now the end result is very good, they have 5g locked out unless you use uscellular, and it is so dumbed down its like using the first gen lte, remember when all we had was 3g then gen 1 lte came out and we went from 3mbps to like 8 or 10 and ...

I've tried every possible combo (battery, power cord, both).

The best I can find is shorting reset points, but can't find more info

The last resort is to boot it into boot-loader mode and flash it with the latest firmware which should reset the password.
Not sure if it's available to the ...

I disabled the reset button in settings :lol:

Well, on most routers/hotspots, the reset button works independently of the software settings.
You may have disabled it to prevent an accidental reset while it's working in normal mode, but during the boot-up process it should still be functioning ...

Long story short, bought the calyx membership in 2022. Set it up with password and blocked reset button and touch screen settings to keep kids from messing with it.

Most devices can be reset by holding down the reset button and plugging in the power cord.
Or holding the reset button for 30 ...

I am in a fringe area and my 4G two year old tablet plan is having some issues with performance. I have learned that 5G is available in my area for some people so I was wondering if I can just pop the SIM card into my new equipment without having to make an appointment with the store to change ...

As you may know, at&t version of Netgear mr6110 lacks bands n41+n78 - mostly used in Asian countries. I got these pictures from a forum showing that it can be running on band n41 for 5g. I'm quite sure that that carrier is using band n41 for 5g. I also noticed that it seems they were flashing a fw ...

okay, I don't know how else to explain so please bare with me. I've installed AB21 prerelease, ive changed my wifi names and enabled them all, and now it's not letting me access any essential settings. keep getting a code of "L.naturalCompare is not a function" and I've did the 30x30x30 reset and ...

Just wondering if anyone can help me with step by step instructions to setup failover. We are FINALLY getting fiber broadband, but I would like to keep my 4G LTE as a backup. I'm using a TAKTIKAL 1600 router with GoldenOrb_2024-07-22 firmware. I'm assuming it's done through MultiWAN Manager, but I ...

.
!!! WG1608 GoldenOrb update 5G WiFi drop-out fix !!!

Today Dairyman has released a new GoldenOrb update to address the 5G WiFi drop-out issue since this router came out.
Test and post your results here.

16MB version
http://aturnofthenut.com/autobuilds/ZBT-WG1608-16-GO2024-09-05-AB22.zip

32MB ...

I am also thinking maybe T-Mobile has throttled me down and these messages are possibly a result?

Any suggestions or help will be greatly appreciated! Thanks in advance!

It could be a service or router issue, so test the sim card in a phone.
If it doesn't work, it's a service issue.
If it ...

Alokyirq wrote: Thu Aug 22, 2024 3:43 pm don't working for me
can you help me!

When I try to save the file using vi, an error appears.

/Etc/init.d/ttl.sh &

Should be

/etc/init.d/ttl.sh &

Thanks for advice.
Found aunt's address that does have service went into store and got it. Made sure to get the ARC-XCI55AX model since seen can add antenna to that model. Last night did some driving around checked 5 tower sites. Have allot of LTE only sites around us. Noticed on LTE most of the ...

I want to use start using Ethernet instead of using USB 3.0 connection. Goldernorb is what im running on my router. I have control of the modem using my Wrt3200acm but it's not stable for my day to day internet connection using USB. So openwrt is much more stable with ethernet and I'm trying to ...

Thank you for the response. I’ve tried using the following combinations:

AT#ACTIVEFW=1,3
AT#ACTIVEFW=3,1
AT#ACTIVEFW=1.3
AT#ACTIVEFW=3.1
AT#ACTIVEFW=3

They all return ERROR. I’m using the miscellaneous section found under Modem in GoldenOrb, should I send the commands using a different method ...

jackcrap wrote: Tue Jul 30, 2024 7:23 pm
Thanks Bill, I was thinking of a different kind of magic, related setting the IMEI part

Oh no sir, I plead the 5th on that! lol
Actually I meant to reply to another user "greatness"... my bad. heh

Re: LM960A18 on AT&T AT COMMAND HELP jackcrap wrote: Sat Jul 27, 2024 7:08 pm

jackcrap wrote: Sat Jul 27, 2024 7:08 pm

I have a 5g modem and have it locked to band 71 (primary), band 41 (secondary). With this configuration I get the fastest throughput. However, band 71 drops frequently and I then have 41:41, which doesn't produce the best throughput. Is the reason for dropping band 71 due to being, perhaps, on the ...

airwalker wrote: Wed Jul 17, 2024 11:10 am That would definitely be an ideal scenario. Hopefully Rich will consider this!

"I have a lot of time in this project and would like to finish it up it"
This is his business making custom mods, don't expect it to be public domain anytime soon, just sayin'.

So how can I do it through goldernorb? I want to get tailscale set up before I go back to openwrt. It has an option to where I can activate its web ui on the 8080 port.

First, here's how Tailscale works.
https://tailscale.com/blog/how-tailscale-works

To install and use Tailscale on an OpenWRT ...

Not sure why would you need ADB/Fastboot modem access to install Talscale?
You can simply install it on a Windows or Linux box, or probably even on an OpenWRT router.

Code: Select all

curl -fsSL https://tailscale.com/install.sh

Thanks, I will try this configuration. I use digikey, because we have daily package from them at work and I can include my items in it with free shipping, but they have those quectel antennas.

For the modem configuration, I downloaded the list of AT commands, but I find nothing about manual band ...

What is the configuration to check on the model to be sure it has fully automatic band selection?

I tried a few antennas I had running around, but they are all worse than the one I have (around -112 instead of -109).

The modem has 4 antenna connector, but it seems only one is used by LTE, I see ...

Ok, I thought the antenna I picked would be a good fit. Do you have a recommendation?

Due to your constantly changing direction and location in a plane, I would try some high gain omni directional antennas (flat or round) stuck onto a window where you get the most amount of signal. Otherwise ...

So I've been using this setup for a couple years now and it's been great. I haven't done any updates because I just don't know enough about all this and don't want to lose the unlimited connection if I screw something up.

My issue that brings me here today is that over the last few months the ...

Looking for anyone out there that may be able to provide me with the AT Commands for a Dell DW5931e (Fibocom FM350-GL) specifically targeting imei repair. I did find a link on the forums in another post that had one for a Dell DW5821e Google Docs forum. Curious if anyone knows if these commands ...

Probably no hardware configurations for the modem, but definitely needs some software settings to make it work with your carrier.

Thank you for the info. I am just using a T-mobile hotspot (TMOHS1) now and can only get 5Mbps (I know, super slow). It is fine for just watching youtube but am wanting to get a security wi-fi camera so want to get router to handle more speed. I speedtest my iphone 12 and could get over 100Mbps ...

I am on the T-mobile tablet plan and was thinking about getting the GL-AP1300-LTE as well. What type of speeds are you getting? Thanks.

Depends on the modem. With an older Quectel-EC25-AF CAT4 you'll get around 20Mbps, with an EM06 CAT-6 around 50Mbps (average).
With a more modern EM160 CAT-16 ...

Okay. I'm still learning about the hardware. I keep having problems with my pings, until I've realise that the factory 4 antennas is garbage.... So, I've found two worthy antenna upgrades. I can keep it sleek and discrete or I can just simply upgrade from these crappy ones. So these are two of the ...

Probably there's a script somewhere which keeps changing the imei.
Look for any router startup or modem config scripts containing the command "AT+EGMR="
Delete it, and that should fix it.
Are you running GoldenOrb or OpenWRT firmware?

2024 Resurrection Update:
I decided to tackle this issue again and this time I definitively figured it out. It was all related to signal quality. SINR to be exact.
Whenever I get around 15-20 sinr, I can achieve speeds of 100+Mbps

I unhooked my mimo external antenna and just hooked up the stock ...

jsmith3301 wrote: Wed Jun 19, 2024 5:22 pm Never mind, figured out what I did wrong.

On some devices you may get a blank screen or an error message which is fine, it's still in download or fastboot mode.

Live in a rural area with Verizon LTE coverage. I have visible as my carrier (Verizon network).
Any other suggestions or advice for my scenario and setting up an LTE router?

Thanks!

The problem with many "all-in-one" mobile routers is that you either get a good modem or router, but usually ...

The monthly data limit of 300 gigs cannot be bypassed, only the hotspot limit.
However, the monthly limit can be reset at any time by making an early payment, should you go over it before the the end of the billing cycle.
If you want to have an extra phone at no additional cost, just tether an ...

It's unlikely that the modem's firmware update caused the lights to go out, it may be just a coincidence.
On the other hand, the router's firmware update can cause some light not to function which can usually be fixed, but not by AT commands.
Try replacing the LED's first.

Sweet. Thank you. I have new a new verizon sim card coming and will give the above a try. I was wondering if part of my problem was due to the age of the sim card and the fact that the accounts it was previously attached to was long since expired. I figured it would be a good idea to start with a ...

I'm suffering the same issue here. Is changing the IMEI the only option to activate on Verizon?

Verizon is quite finicky when it comes to activation due to their weird CDMA/GSM system.
Most other GSM carriers like ATT and Tmobile activate fine in just about any device.

As I mentioned earlier ...

seloka190 wrote: Tue Jun 04, 2024 8:08 am any recommanded of compatible uart jtag tool
from aliexpress exemple...

It's not just the JTAG interface that's needed, but the proper loaders specific to each device.
Simply having a hammer, you can built a house without all the constructions materials. heh

samo1 wrote: Sun Jun 02, 2024 11:17 am *** TFTP flashing ***
worked
thanks for the guide

Glad it worked. What IP's did you set the computer and router to for flashing?
And the name of the file in the TFTP folder? So others can learn too.

If you had a connector soldered in and the 10 pin out of your interface matched it's a straight connection.
Otherwise you need to tack on single wires to the pads.
Usually a 10 pin JTAG connector is 2 x 5 in either 100 mil or 50 mil pitch.

That's possible too. On the main board of phones there ...

brettgavin wrote: Wed May 29, 2024 11:30 am
My speedtest.net, fast.com, and ipfail.org tests all meet or exceed my current needs.

Why would you need to use a VPN to access a site like IPFail.org?
It doesn't seem to be a speed test site like the others.

Thanks Renate....I love the count.

To that I reply....BRRRRRRING. Phone. Phone? Yup yup yup yup yup.

But you forget what a newbie I am. So, if I try to perform a JTAG at some point, do I connect to those 10 solder joints, or the 8 copper pads?

Usually JTAG uses contact pins for quick ...

Oops! Yes, thanks Bill, it is indeed 8 pins.

While prying off the cans, I accidentally removed one of these brass tab things.

Can anyone tell me what is its purpose by looking at the PCB photos?

I'm used to soldering larger through-hole components. If I wanted to resolder it, how would I do ...

Take a look at this post.
https://wirelessjoint.com/viewtopic.php?t=4224

Hogwild wrote: Mon May 27, 2024 9:11 pm Counting the ones that are closely together, I count only 9 pads. Am I missing something? Does it matter?

I'm only seeing 8 pins, the layout looks like a JTAG contact of some sort.

The firmware flashes the software part of the UI/Linux OS, possibly some parts of the modem, but nothing related to enabling disabled bands on the 6500 and other models with only select bands enabled.

I have not attempted to enable any bands as my primary goal was to be able to unlock the ...

Search found 1233 matches