Mcuzone led lights not working properly after rm500 update
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
DeUndefined1
- Posts: 29
- Joined: Sat Feb 22, 2020 5:42 pm
- Has thanked: 0
- Been thanked: 2 times
Mcuzone led lights not working properly after rm500 update
Okay, i have my modem into a m.2 adapter to 5g lan adapter. Just updated my modem to newer firmware. Then my green power led went out. Then the very next day, my green 5g led light started flickering, then it has went out also. Is there a way to turn the lights back on using at-commands? Or maybe test the power off both led lights using the at-commands? I have a donor router using the same micro led, so I can swap those in anytime.
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: Mcuzone led lights not working properly after rm500 update
It's unlikely that the modem's firmware update caused the lights to go out, it may be just a coincidence.
On the other hand, the router's firmware update can cause some light not to function which can usually be fixed, but not by AT commands.
Try replacing the LED's first.
On the other hand, the router's firmware update can cause some light not to function which can usually be fixed, but not by AT commands.
Try replacing the LED's first.
