Hello,
I have installed a dw5811e on dell e5570, the problem is that it is only working on 3g mode, I'm trying to flash the device to generic mode but I could not get the putty to connect, there is 2 com ports available, on port3 just black screen with no input enabled and on port5 just some numbers, I'm not an expert on computer programming, could someone please let me know how to make the connection correct to run the commands , thanks
https://imgurl.ir/uploads/y803850_.jpg
EM7455 putty connection
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
deadlord_2
- Posts: 2
- Joined: Sat Mar 21, 2020 6:59 pm
- Has thanked: 0
- Been thanked: 0
EM7455 putty connection
You do not have the required permissions to view the files attached to this post.
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: EM7455 putty connection
The DW5811E is basically a Dell branded Sierra EM7455B with locked firmware, therefore it's a pain to work with.
You're better off just replacing it with a standard/unlocked Sierra EM/MC7455. Just my 2cents.
You're better off just replacing it with a standard/unlocked Sierra EM/MC7455. Just my 2cents.
-
FreeRangeRedneck
- Posts: 12
- Joined: Tue Nov 19, 2019 8:04 pm
- Has thanked: 0
- Been thanked: 0
Re: EM7455 putty connection
IIRC, the third COM port is revealed under
DeviceManager -> Modems -> dw5811e -> Properties
Was a way to determine COM port numbers and then go straight to putty
DeviceManager -> Modems -> dw5811e -> Properties
Was a way to determine COM port numbers and then go straight to putty
