Router Choice
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
Re: Router Choice
Hello,
Far as I know the only difference would be the limitations of the Lan ports. For example a WE826 has 100 Mbps limited Lan ports. Allot of people say it will be actually limited to 85 Mbps in real life use.
Far as I know the only difference would be the limitations of the Lan ports. For example a WE826 has 100 Mbps limited Lan ports. Allot of people say it will be actually limited to 85 Mbps in real life use.
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Router Choice
On a basic level, the interfaces are the bottlenecks. Gigabit LAN ports versus 100M LAN, USB2 bus for the modem vs USB3.
Otherwise you get into the processor capabilities, and amount of memory. This matters more so when you load up the router with process intensive applications like VPNs and router services for file storage and printer spooling, etc.
I usually just stick with matching the ethernet and usb bus needs to the job, and whether or not simple wifi radios are required all in one, or not.
Otherwise you get into the processor capabilities, and amount of memory. This matters more so when you load up the router with process intensive applications like VPNs and router services for file storage and printer spooling, etc.
I usually just stick with matching the ethernet and usb bus needs to the job, and whether or not simple wifi radios are required all in one, or not.
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Router Choice
That 100% depends on the router firmware and wether or not it supports usb hostless modems. IE mbim and qmi drivers, and a few others, and some form of interface software.
Re: Router Choice
far as i know the "conventional router" would have to be running some form of goldenorb to be able to use the usb/modem card.
I have had my wg3526 running over a year 24/7 and no issues.
I have had my wg3526 running over a year 24/7 and no issues.
Re: Router Choice
I am really just asking out of curiosity for information.
Could another NEX5RGO be used as an access point for my current NEXR5GO then it could be put into service as the main router if needed?
Could another NEX5RGO be used as an access point for my current NEXR5GO then it could be put into service as the main router if needed?
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Router Choice
Two is one, one is none.
Three is for me, four is more, five aint no jive, six is a fix, seven is heaven, eight.....
Re: Router Choice
You could but honestly on most of the routers the wifi is subpar to using even a generic home router as an AP, so while you would gain redundancy you would be forced to deal with subpar wifi. Pick your poison
-
- Posts: 249
- Joined: Sun Jul 05, 2020 2:29 pm
- Has thanked: 239 times
- Been thanked: 30 times
Re: Router Choice
I won't call an archer c8 "low end". I almost exclusively use archer c7's w/ GO as the modem interconnect. I get them for $5 to $25 depending on accessories, condition and how badly they want to throw it away
-
- Posts: 249
- Joined: Sun Jul 05, 2020 2:29 pm
- Has thanked: 239 times
- Been thanked: 30 times