WE826-T2 W/ EM7455

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
User avatar
wisenet
Posts: 15
Joined: Tue Dec 01, 2020 11:13 pm
Location: Mississippi
Has thanked: 8 times
Been thanked: 0

WE826-T2 W/ EM7455

Post by wisenet »

So I was fighting with a EP06-A and could not get it to work. So I broke down and purchased the EM7455. Swapped out the modem in the T2, I had WIFIX Goldenorb installed so I set the APN popped in a SIM and we are off to the races. Well on my phone it is working well. My PC on the other hand will not work. I can connect both to it and the PC will not work but the Phone will. Any Ideas?
User avatar
Didneywhorl
Posts: 3646
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1370 times
Been thanked: 764 times
Contact:

Re: WE826-T2 W/ EM7455

Post by Didneywhorl »

So your saying its working over wifi but not LAN?
toddw
Posts: 158
Joined: Tue Aug 18, 2020 5:43 pm
Has thanked: 26 times
Been thanked: 68 times

Re: WE826-T2 W/ EM7455

Post by toddw »

I have three units with March release of goldenorb where the DHCP service does not play well with windows devices. I have not pinpointed what causes it, but disabling IPV6 seems to fix it. Or making the edits restarts the DHCP daemon. Either way this fixed it and I haven't had an issue with PC's since...

Click on “Network”
Click on “Interfaces”
Click on “Edit” next to “LAN br-lan”
At the bottom of the screen, under “DHCP Server”
Click on “Advanced Settings”
Click on “Force”
Click on “Save and Apply”
Click on “IPv6 Settings”
Next to Router Advertisement – Service, click the drop down for: Disabled
Next to DHCPv6-Service, click the drop down for: Disabled
Next to NDP-Proxy, click the drop down for: Disabled
Click on “Save & Apply”
Post Reply

Return to “General and Unclassified”