Wireless Joint

...
APN:
AT+CGDCONT?
+CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0

OK


Try adding the IP APN:

AT+CGDCONT=2,"IP","vzwinternet"


Band:
AT+QCFG="band"
+QCFG: "band",0x260,0x2000000000000101a,0x0

OK

What else can I check?


Why are you band locked out of so ...

Changing to ECM mode sometimes requires you to SSH in and run AT commands manually, especially to change it back to QMI or MBIM. Try that one as a last ditch effort.

I think Verizon likes when the router and modem communicate in MBIM, though it really shouldn't matter.

Could also try custom firewall rules.
#start TTL rules
iptables -t mangle -I POSTROUTING -j TTL --ttl-set 117
iptables -t mangle -I PREROUTING -j TTL --ttl-set 117
ip6tables -t mangle -A POSTROUTING -o wwan0 -j HL --hl-set 117
ip6tables -t mangle -I PREROUTING -i wwan0 -j HL --hl-set 117
#end TTL ...

Didneywhorl wrote: Sat Dec 05, 2020 6:28 pm Changing to ECM mode sometimes requires you to SSH in and run AT commands manually, especially to change it back to QMI or MBIM. Try that one as a last ditch effort.

Agree be careful about that ecm mode. Can be a pain to get out of. I try to avoid that all together personally.

gscheb wrote: Sat Dec 05, 2020 8:23 pm Agree be careful about that ecm mode. Can be a pain to get out of. I try to avoid that all together personally.

Agreed. Last ditch effort.
When it works it works really well. It seems to reconnect, when connection lost or going mobile, very fast in ECM mode.

Hello,
Look at this post, it might help.
http://wirelessjoint.com/viewtopic.php?f=19&t=1289&p=10327#p10327

wisenet wrote: Sun Dec 06, 2020 8:28 pm Where would I go to change them?

Hello,
Assuming you are using this router for wifi?
Here is a link to change DNS in rooter.
https://wirelessjoint.com/viewtopic.php?f=19 ... =10#p10732

What seems to be happening when using the CloudFlare DNS app, is that it sets up secure DNS channel which the carrier cannot filter, or simply bypasses some IPv4/v6 incompatibility. Have you tried browsing the web using an ethernet/LAN connection instead of WiFi?


Anyway, since now your ...