No Aggregation - Slow Speed
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
rfaulkner99
- Posts: 6
- Joined: Sun Jun 14, 2020 7:34 pm
- Has thanked: 0
- Been thanked: 0
No Aggregation - Slow Speed
Hi, can someone help me find out why I am not seeing any CA on a NEXQ6GO with an EM12 modem on AT&T? I am new to this, thanks.
-
Viper67857
- Posts: 166
- Joined: Wed May 13, 2020 7:04 pm
- Has thanked: 12 times
- Been thanked: 45 times
Re: No Aggregation - Slow Speed
Do you have it locked to band 2? That's a fairly high-frequency band and your signal isn't good... It would normally seek out a 'worse' band with better signal if it's not locked. You definitely need to work on your signal either way.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: No Aggregation - Slow Speed
Use WiFi on this model to test speeds, and change your Signal Info screen to "fast" update (15 seconds) and make sure you hit the apply change button. Then scroll to the spot that shows your frequency Band (B12, etc). Then run a speed test. Watch that spot where it shows Band and CSQ, etc. If it hits CA it will show there.
Also I believe the AT command to see the CA info is
Also I believe the AT command to see the CA info is
Code: Select all
AT+QCAINFO