Wireless Joint

The latest ZBT router WG1608 would have all your requirements including native M.2 for modem slot (with 5G antennas), 1Gb ethernet, USB3 bus and as a bonus a new WiFi chipset which would allow you to eliminate your old Asus router if you choose to. The only downside is the lack of custom firmware at ...

OpenWRT/LEDE does not have a true bridge mode. The closest configuration to bridging is to DMZ (De-Militarized Zone) all traffic from the gateway router (WE826) to a secondary router/device (MAIN ROUTER) which will handle the DHCP and Firewall.

I have used a couple of different configurations to ...

Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here.

I've translated the recovery page so you can see what is what ...

Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router



I've noticed that the latest version WG3526 bootloader, no longer requires the IP to be set to a specific value on the pc.
Unplug the power cable, hold down the reset button, inset ...

Just another update -- I'm still using the iPad plan, so it certainly does seem like only high data users are getting kicked.

To be fair, did you really expect to not be booted for using north of 400GB a month?



If carriers claim unlimited, then it should be truly unlimited (like Tmobile ...

Well didney has a15 for you to revert back with if goldenorb doesn't like a20.. I'd go for it if it were me. Also, could you paste that link? I don't want to try typing it from the picture 😂


FW link will be expired in on week.

EM12GPAR01A20M4G:
https://cnquectel-my.sharepoint.com/:u:/g ...

On another note, on A17, though my CA stays working even after a week without reboots, I can't seem to get any intraband CA working at all. I thought it was just my tower, but my phone seems to do band 2 + 2 just fine. If I lock the modem to band 2, then there's no CA at all. Opening all bands it ...

Having everything on one single page looks a bit difficult to manage at the least



Yeah, that huge thread on that forum is truly a clusterf*ck, though some really good info. lol
But an even bigger mystery is why they haven't added a single line (mkdir -p "/opt/WRTbmon/data/") to the source code ...

High powered gigabit injectors exist for this purpose. The standards are in place for minimums, it does not stop the device from being supplied more current if its connected devices draw it.

Instead of getting wrapped up in "standards", just try it. Just make sure the voltages match.
Were not ...

******
/sys/class/net/wwan0/cdc_ncm/tx_timer_usecs -->edit--> change from 400 to 0 when in MBIM mode will drop ping to less than half.
******

******
But if you open /usr/lib/rooter/connect/create_connect.sh and navigate to about line 770 you'll see a line:

# MBIM connect script
About 15 lines ...

All VPN's degrade the raw data speed to a certain degree due to the encryption/decryption overhead at both the user and server side.
Throughput depends primarily on the hardware (CPU/memory) the the VPN client it's running on. Most consumer grade mobile routers usually run on some "cheesy" MTK CPU's ...

There's apparently a 12/02 goldenorb up now... Anyone done any analysis on the differences? Changelogs sure would be nice, but with all the routers they're supporting I suppose that would be far too much to ask.


I think it was just an attempt to get the 5Ghz Wifi working. The changelogs are via ...