WG3526 with MC7455

Internet Speed Test Results, Links, and Discussions
Forum rules
Use the FORM MODE button to post
Post Reply
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

WG3526 with MC7455

Post by JimHelms »

Carrier:
Sprint
Distance_to_Tower:
2.1 to 3 Miles
Type_of_Device:
WG3526-P Mounted inside Antenna Enclosure
Type_of_Modem:
Sierra Wireless MC7455
Firmware:
GoldenOrb
Antenna_Setup:
WiFix 2400-2700MHz WiFi 4G LTE 19dBi Directional MIMO Antenna (± 45° )
Cable_Type:
CAT6A Ethernet Cable
Speedtest_Photo_1:
Speedtest_Photo_2:
You do not have the required permissions to view the files attached to this post.
User avatar
Didneywhorl
Posts: 3635
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1369 times
Been thanked: 761 times
Contact:

Re: WG3526 with MC7455

Post by Didneywhorl »

Wow! Noice!
cherub05
Posts: 10
Joined: Thu Sep 13, 2018 3:29 pm
Location: Ohio
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by cherub05 »

Carrier AT&T Band 30/12 aggregation I'm getting 45 down & 19.9 up but my ping is all over the place because of NAT444. The closest net hub to me is Chicago or Washington D.C. and I'm trying to locate the best VPN service that can provide me an addressable public IP to stabilize it. Any suggestions and what settings do I need to do in the router
User avatar
Didneywhorl
Posts: 3635
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1369 times
Been thanked: 761 times
Contact:

Re: WG3526 with MC7455

Post by Didneywhorl »

I cant say Im super experienced here, but do you have a public ip from ATT? Sometimes you can request one for a few bucks more per month, though Im not familiar with ATTs offerings.

Also, why do you say NAT is causing ping issues.... I need to google "NAT444".
cherub05
Posts: 10
Joined: Thu Sep 13, 2018 3:29 pm
Location: Ohio
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by cherub05 »

I'm using a MVNO provider on AT&T's network "NetBuddy". I am not on a publicly pulled IP address. What Double Nat essentially is: A carrier puts 100's possibly 1000's of its subscribers behind 1<----ONE! IP address! All but a few ports are open (strict NAT). This essentially breaks end to end internet. Kills gaming, increases lag, home security monitoring, some digital streaming services, controlling your thermostat before you get home, paying bills on line ect.. Should one person behind that shared IP address be breaking the law everyone behind that address is suspect!!!!!
cherub05
Posts: 10
Joined: Thu Sep 13, 2018 3:29 pm
Location: Ohio
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by cherub05 »

As you can see I need to fix some things. I do believe a good VPN provider can help
You do not have the required permissions to view the files attached to this post.
cherub05
Posts: 10
Joined: Thu Sep 13, 2018 3:29 pm
Location: Ohio
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by cherub05 »

UM, I don't think people are looking at the raw CMD reports..... those web based pics I gave are not at all consistent! I promise there is no malicious code in them.
User avatar
Didneywhorl
Posts: 3635
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1369 times
Been thanked: 761 times
Contact:

Re: WG3526 with MC7455

Post by Didneywhorl »

:)
k9kfx
Posts: 7
Joined: Tue Apr 24, 2018 12:10 am
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by k9kfx »

I too am steadily on the look out for a solution to this issue for public ip addressing. I have things i need access to as well.
tonydobbs
Posts: 23
Joined: Sun Feb 10, 2019 12:57 pm
Has thanked: 0
Been thanked: 0

Re: WG3526 with MC7455

Post by tonydobbs »

JimHelms wrote: Sun Apr 29, 2018 3:01 pm
Carrier:
Sprint
Distance_to_Tower:
2.1 to 3 Miles
Type_of_Device:
WG3526-P Mounted inside Antenna Enclosure
Type_of_Modem:
Sierra Wireless MC7455
Firmware:
GoldenOrb
Antenna_Setup:
WiFix 2400-2700MHz WiFi 4G LTE 19dBi Directional MIMO Antenna (± 45° )
Cable_Type:
CAT6A Ethernet Cable
Speedtest_Photo_1:
Speedtest_Photo_2:
Is that using a Sprint MVNO or 'direct' from Sprint?
Post Reply

Return to “Speed Tests”