how to change cellular mode to 4G only

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
ericj205
Posts: 64
Joined: Fri Dec 13, 2019 9:43 pm
Has thanked: 0
Been thanked: 2 times

how to change cellular mode to 4G only

Post by ericj205 »

I am trying to change my cellular mode from Automatic to 4G Only. I have tried the "DISCONNECT CURRENT MODEM" button then I selected 4G Only at the Change Cellular Mode field, then selected "APPLY MODE CHANGE".

It seems to work at first but keeps resorting back to Automatic mode for some reason. What am I doing wrong?

System
Hostname ROOter
Model ZBT-WE826 (16M)
Architecture MediaTek MT7620A ver:2 eco:6
Firmware Version GoldenOrb_2019-03-10 ( OpenWrt 18.06.1 )
Kernel Version 4.14.63
Local Time Mon Dec 16 10:09:25 2019
Uptime 0h 45m 45s
2019-12-16_10-03-15.png
You do not have the required permissions to view the files attached to this post.
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: how to change cellular mode to 4G only

Post by JimHelms »

What modem?
ericj205
Posts: 64
Joined: Fri Dec 13, 2019 9:43 pm
Has thanked: 0
Been thanked: 2 times

Re: how to change cellular mode to 4G only

Post by ericj205 »

Quectel EC25

After going back and re-reading my post in the Tower forum, I noticed you suggested an AT command:
AT+QCFG="nwscanmode",3,1

Should I ignore the cellular mode field in my picture above and simply enter this command in the AT Command Terminal?
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: how to change cellular mode to 4G only

Post by JimHelms »

That would be up to you. I do not know if that version of GoldenOrb will change the mode with the button.

The AT Command should change it at the modem level.
Post Reply

Return to “Firmware”