I am trying to change my cellular mode from Automatic to 4G Only. I have tried the "DISCONNECT CURRENT MODEM" button then I selected 4G Only at the Change Cellular Mode field, then selected "APPLY MODE CHANGE".
It seems to work at first but keeps resorting back to Automatic mode for some reason. What am I doing wrong?
System
Hostname ROOter
Model ZBT-WE826 (16M)
Architecture MediaTek MT7620A ver:2 eco:6
Firmware Version GoldenOrb_2019-03-10 ( OpenWrt 18.06.1 )
Kernel Version 4.14.63
Local Time Mon Dec 16 10:09:25 2019
Uptime 0h 45m 45s
how to change cellular mode to 4G only
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Re: how to change cellular mode to 4G only
Quectel EC25
After going back and re-reading my post in the Tower forum, I noticed you suggested an AT command:
AT+QCFG="nwscanmode",3,1
Should I ignore the cellular mode field in my picture above and simply enter this command in the AT Command Terminal?
After going back and re-reading my post in the Tower forum, I noticed you suggested an AT command:
AT+QCFG="nwscanmode",3,1
Should I ignore the cellular mode field in my picture above and simply enter this command in the AT Command Terminal?
-
JimHelms
- Site Admin
- Posts: 1366
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 79 times
- Been thanked: 199 times
- Contact:
Re: how to change cellular mode to 4G only
That would be up to you. I do not know if that version of GoldenOrb will change the mode with the button.
The AT Command should change it at the modem level.
The AT Command should change it at the modem level.
