MR6550 full firmware ported over to mr6500- anyone want to beta test it ???

[syahrulxy91]

read my post a few posts above this one dated july 11th it states I do not have a 6550 or 6xx0 now to continue this project,
The ones I had had to be returned to the rightful owners.
thus it is on hold until such a time when I can have these 2 devices in hand again.

This is all I do these days (besides work on the farm here) good progress has been made on this device class and it is close to being finished.

I do not answer every post because it is so redundant in these threads, if the posters would read thru the thread the answers to their questions are right above them most of the time, it just clutters up the forum to have threads with the same questions & answers over and over again and at some point creates alot of work for someone to have to come back and clean the threads up and delete repetitive post as well as makes reading thru them a days long process, if we can try to keep the threads clean by only posting things that are useful the threads will be much more easy to navigate and find things.

will mr6500 would work for you to continue the project? if so i can send you mine since im not using it right now...

[Rich Hathaway]

Yes it would work fine however you must know it may get messed up beyond repair so if you cannot afford for this to happen to it then hang on to it.

[Maplewood]

Do you still need an MR6500 to continue testing? If yes, I could probably send you mine in a few weeks.

[Rich Hathaway]

Yes I do still need one

[DJM19]

Hey @Rich Hathaway , I believe I sent you an email if you are the same Rich that someone referred me to on Reddit. Got a 6110 that I'm not sure all the bands are working on after hacking, I'd be more than willing to pay for your time if you can help me.

[Maplewood]

Yes I do still need one

I have a 6150 arriving in a couple of days. I can send you my 6500 to play with once I get the 6150 setup. I'm willing to risk it getting bricked if you can figure out how to port the modem firmware from the 6550 and open all the bands.

[Rich Hathaway]

Yes I do still need one

I have a 6150 arriving in a couple of days. I can send you my 6500 to play with once I get the 6150 setup. I'm willing to risk it getting bricked if you can figure out how to port the modem firmware from the 6550 and open all the bands.

Ok sounds good

Hey @Rich Hathaway , I believe I sent you an email if you are the same Rich that someone referred me to on Reddit. Got a 6110 that I'm not sure all the bands are working on after hacking, I'd be more than willing to pay for your time if you can help me.

What bands are you trying to get working?

[DJM19]

I’m not real sure to be honest. I flashed the M6550 firmware from this blog post - viewtopic.php?p=29138#p29138 onto the 6110 because mine didn’t support OpenMEP and was told it may have disabled some of the 5G bands from a guy who was helping guide me. He had told me about what I suppose is this beta firmware that I’m reading about and that I should talk to you.

[Rich Hathaway]

There is no need anymore to take a chance and reload firmware to your devices that are locked out of
openmep, this can now be fixed without the need to reload them, all MRxxxx devices supported m1. m5, m6

Does your device still work and get service?

[DJM19]

Oh ok. I had no idea. Yes, device works and has service, from what I see it’s been staying on B66 all the time. I unfortunately don’t know if that’s by nature of living in a rural area with poor 5G coverage or if software causing the problem.

[Maplewood]

Oh ok. I had no idea. Yes, device works and has service, from what I see it’s been staying on B66 all the time. I unfortunately don’t know if that’s by nature of living in a rural area with poor 5G coverage or if software causing the problem.

I live in an area with great T-Mobile coverage. My Inseego FX2000 router for my T-Mobile Business Internet connects on B66 and N41. My MR6500 only connects to B66 since it has the AT&T modem firmware that does not have any of the T-Mobile 5G bands enabled. So my MR6500 gives me much slower speeds than my Inseego FX2000.

[moddermod]

read my post a few posts above this one dated july 11th it states I do not have a 6550 or 6xx0 now to continue this project,
The ones I had had to be returned to the rightful owners.
thus it is on hold until such a time when I can have these 2 devices in hand again.

This is all I do these days (besides work on the farm here) good progress has been made on this device class and it is close to being finished.

I do not answer every post because it is so redundant in these threads, if the posters would read thru the thread the answers to their questions are right above them most of the time, it just clutters up the forum to have threads with the same questions & answers over and over again and at some point creates alot of work for someone to have to come back and clean the threads up and delete repetitive post as well as makes reading thru them a days long process, if we can try to keep the threads clean by only posting things that are useful the threads will be much more easy to navigate and find things.

Sorry just getting to this.

Still don't understand why the tools cannot be posted, nor firmware. At least more technical people can help if you can do that. It doesn't drive the community forward if only one person is not leaving nuggets to help everyone. Not to make a spectacle but you kind of hold all the cards. I haven't made much progress and I have asked for your guidance in the e-mails at least to point me in the right direction, and hiding behind etiquette and semantics don't help either. I'll just do my own work on the device and share my findings with the community. Thanks. I have another MR6500 coming in. Much appreciated.

[Rich Hathaway]

@moddermod
You are calling me out in public for not opening up my hard drive to you for anything you want from it?
Not cool at all.
let me explain something to you, I do this for a living, while your at work or sleeping or out with your friends or whatever it is you do, I am working every day, every night, doing the research and development, device testing etc.
answer me this how can I put food on the table and keep the lights on if I give everything I have to you ?

This is my business, I have been in it since cellulars conception some 35 years, I am the programmer for the 3 largest M2M companies and I did not spend my life working and accumulating knowledge and making tools and such to just give it away. To suggest I need to give everything away is just dumb. So please stop with the calling me out its a real dick move.
I spend a huge chunk of my time helping people for free everyday, it is aggravating I have to come on here and defend myself from you because I try to make a living in this field. do your own work and think about what you post BEFORE you post it.

[ZzzzShinzzzZ]

@moddermod
You are calling me out in public for not opening up my hard drive to you for anything you want from it?
Not cool at all.
let me explain something to you, I do this for a living, while your at work or sleeping or out with your friends or whatever it is you do, I am working every day, every night, doing the research and development, device testing etc.
answer me this how can I put food on the table and keep the lights on if I give everything I have to you ?

This is my business, I have been in it since cellulars conception some 35 years, I am the programmer for the 3 largest M2M companies and I did not spend my life working and accumulating knowledge and making tools and such to just give it away. To suggest I need to give everything away is just dumb. So please stop with the calling me out its a real dick move.
I spend a huge chunk of my time helping people for free everyday, it is aggravating I have to come on here and defend myself from you because I try to make a living in this field. do your own work and think about what you post BEFORE you post it.

We really appreciated your advices and contributions to this community, Rich.

[w1lliam]

@moddermod
You are calling me out in public for not opening up my hard drive to you for anything you want from it?
Not cool at all.
let me explain something to you, I do this for a living, while your at work or sleeping or out with your friends or whatever it is you do, I am working every day, every night, doing the research and development, device testing etc.
answer me this how can I put food on the table and keep the lights on if I give everything I have to you ?

This is my business, I have been in it since cellulars conception some 35 years, I am the programmer for the 3 largest M2M companies and I did not spend my life working and accumulating knowledge and making tools and such to just give it away. To suggest I need to give everything away is just dumb. So please stop with the calling me out its a real dick move.
I spend a huge chunk of my time helping people for free everyday, it is aggravating I have to come on here and defend myself from you because I try to make a living in this field. do your own work and think about what you post BEFORE you post it.

I would second to Rich's comments, I am giving mrCONFIG as freetool just because I have full time job for my living, it does not mean that everyone should give away what they developed for free. Collaboration is for sure to expedite the whole development, but it should not impact someone else' that doing this for living. Same reason for me to not to open my tool as free to anyone, you need to register for it. It is because I am not intend to impact to anyone who is doing similar thinags for living, it is free just because I am not doing this for living, that does not mean everything developed, at his/her own efforts, should be free and opened. It really depends individual's condition and reason, this should get some respects.

[moddermod]

@moddermod
You are calling me out in public for not opening up my hard drive to you for anything you want from it?
Not cool at all.
let me explain something to you, I do this for a living, while your at work or sleeping or out with your friends or whatever it is you do, I am working every day, every night, doing the research and development, device testing etc.
answer me this how can I put food on the table and keep the lights on if I give everything I have to you ?

This is my business, I have been in it since cellulars conception some 35 years, I am the programmer for the 3 largest M2M companies and I did not spend my life working and accumulating knowledge and making tools and such to just give it away. To suggest I need to give everything away is just dumb. So please stop with the calling me out its a real dick move.
I spend a huge chunk of my time helping people for free everyday, it is aggravating I have to come on here and defend myself from you because I try to make a living in this field. do your own work and think about what you post BEFORE you post it.

I am not taking away from the good that you do. Nor was there a need for a wierd flex. But I was merely suggesting that maybe if you wasn't going to post, that you could point me in the right direction. I didn't come here to put you on blast, but it seems that you have already done so. I was not asking for files on your hard drive but it seems that you have missed the point of what I said in it's entirety. Good luck on whatever it is you do sir. Thanks again.

[RadioActive]

Hi I’m new to the forum…

I just purchased an eBay att unlocked m6 pro…

My plan is to use T-mobile…

The area that I plan to use the device has great mmWave (T-Mobile UC) signal/coverage.

I’m not sure which specific mmWave bands are being used, id like to have access to all of them if possible…

n41, n258, n260, n261…

And the n71 band as well…

Is there a firmware/mod that I can perform on my device that would allow me to enable those bands?

Any and all assistance would be much appreciated…

Thank you,

[yamajason]

new here cannot DM, DM me about where I can send a mr6500 to mod for tmobile bands

[kcmjr]

New to forum, read entire thread, multiple threads actually. The one thing I missed is how one goes about getting the current rev of the firmware? I just got an unlocked MR6500 to replace my old AT&T IFWA-40 (reliable, but junk) that gave up the ghost. I'm now feeling the same pain as everyone else who bought one of these MR6500 units. I don't care about new bands, I just want STABLE firmware that actually works so my home Internet becomes reliable again. I have an older Cradlepoint I may try to get working if I can't get this MR6500 stable soon. Any help is appreciated.

[Rich Hathaway]

What you need to do depends on what carrier you are going to use

[Jaafar32]

So I got a mr6550 for a few days (I already had to send it back to the owner)
But I had it long enough to pull what I needed to make a build from it, I loaded it successfully
on a mr6500 and it ran without issue, got service, and overall looked good.
I do not have time to test much, if a couple of you guys are interested in testing it
hit me up and I'll load one up for you, only a couple testers needed, it should run on other builds as well but I cannot say this to any certainty, yet...
This should be a much easier way to enable the rest of the bands on these models than doing it by filesystem, efs, and rfnv.

Hi can i message you in telegram
@Jaafar_j_z

[Rich Hathaway]

I do not use telegram, my email and skype are all over the web I am not hard to find. you can get it from my advert here in this forum in the marketplace section.

[BillA]

I do not use telegram, my email and skype are all over the web I am not hard to find. you can get it from my advert here in this forum in the marketplace section.

Telegram is full of scammers, I'm hearing horror stories. lol

[Klaus4]

I have got five ATT MR 6500 with older FW... Damn I knew it earllier I wouldt bouth then they are not updateable in Austria and only on LTE bands not 5G so these I can put ino the trash basket?

AT&T Company Chat Transcript
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reference Number: 17291005562677138
DATE/TIME: 2024-10-16 07:41:53

*Your chat transcript:*

[Me] : I cannot sighn in i am from Austria

[AT&T] : Let me try connecting you with someone who can get you the help you need.

[AT&T] : An agent will be with you soon. Stay near your device and keep this window open.

***Connected to live agent.***

***MarkVincent is here to help!***

[MarkVincent] : Thank you for contacting AT&T

[Me] : hello i have a MR6500 bought it on ebay and want them to use in Austria

[MarkVincent] : Before we get started, can I get your wireless number so I can send a One-Time PIN to authenticate your account?

[Me] : +436601021849

[MarkVincent] : I check your number there's no account on AT&T wireless service

[Me] : hello i have a MR6500 bought it on ebay and want them to use in Austria

[MarkVincent] : To make sure you want to create a new account for your hotspot device/ MR6500 , am I correct?

[Me] : I bouth them form an us seller and I am living in Austria so how can I upgrade them to the last FW?

[MarkVincent] : If the device is not locked on the carrier in the US you can use it in Austria

[MarkVincent] : Is the device is under the AT&T ?

[MarkVincent] : Do you have an account on AT&T ?

[Me] : it has an AT&T brand and I dont have an account. As i Said i bouth it on the Internet.

[MarkVincent] : I really want to help you about this further but since you don't have an account we have limited access only and since this is on EBAY you need to coordinate to the point of sales or to the person who sold you the device

[Me] : ok so I need to send them back to the US and then he schould update them all right?

[MarkVincent] : Yes you need to coordinate it to the person who sold you the device

[MarkVincent] : In case you need a reference you may opt to download our conversation after we end the chat.

[MarkVincent] : "1. Just click on ""Settings” and then navigate to the ""Download Transcript"" option.
2. Also, you can click the “download transcript” option,
which appears after you click the “X” button on the top right corner of the chat window."

[MarkVincent] : Thank you for choosing AT&T, we appreciate your business. Please click on the ‘X’ to close this chat. Have a great day!

[Me] : thanks

***MarkVincent has left the chat***

***Bye for now! We hope we helped.

Select the X in the top right of this
window to close the chat.

Want help with something else?
You can open a new chat, or
(Link)browse our support articles(Link) for more information.***



[AT&T] :

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2024 AT&T Intellectual Property. All rights reserved.
AT&T and Globe logo are registered trademarks of AT&T Intellectual Property.

[Rich Hathaway]

Definitely dont throw them in the trash, what bands do you need them to be using?

[BillA]

[MarkVincent] : Yes you need to coordinate it to the person who sold you the device

"Yes you need to coordinate it to the person who sold you the device" Ba-ha-ha, a typical big company response by some clueless overseas customer service who barely speaks English. smh

[Klaus4]

First the firmware is old and then I need Euopean bands

[yamajason]

I do not use telegram, my email and skype are all over the web I am not hard to find. you can get it from my advert here in this forum in the marketplace section.

kcphonestores@gmail.com I get no response to this email address? Is it correct?

[Rich Hathaway]

Yes it is correct but all emails have been answered as of right now so you must be typo'n it in the mail or something.
you can also use customersupport@mifis.us

[Rich Hathaway]

First the firmware is old and then I need Euopean bands

That firmware is good once updated they will lock you out, meaning no openmep, no telnet, no open port on 5510 and install an efuze on your device, and while version 12.xx can now be repaired for those things without the need to upgrade or downgrade it is just more work to do if you update them, and most of us here have no idea which bands are european bands, if you could tell us you might get some help from someone.

[acato]

Is it possible to unlock the n71 band on an MR6500? I have the MR6550 firmware installed but am still not able to use n71.

[Siangko89]

I have 1 AT MR6500
V b v bbb
Should I downgrade to MR6450 latest firmware

Or should I flash to MR6550 with lower verion

[Rich Hathaway]

um, I did not say that lol

[Siangko89]

Can you send me the tutorial how to gain more band frequency I have 1 MR6500 AT & T

Email :siangko7399910@gmail.com

Telegram
+60177399910

[muzdai]

Hello

I have MR6500. Can you give me ported full firmware for tests? vpanidi@gmail.com
+995555366468