Wireless Joint

I’m using a $50/m Autopay AT&T plan on a x750 spitz running GoldenOrb. Signal strength is around 40% and stays on B4 most of the day and does CA with B66 or B12 when I’m assuming the tower is congested.

I’ll get disconnected normally once a day or less per my connection log and I have connection ...

Jayhawks659 wrote: Fri Aug 27, 2021 6:30 am is there any way to use a device to find out the TTL and HL number in your current location instead of just using trial and error?

Simply just connect to the device you are wanting to check and ping it, it will return your outgoing ttl

Got my Tmobile sim yesterday. Stuck it in my LT18 and had video throttling. Disabled TTL settings and fast.com shows 90Mbps. Re-enabled IPV6 and still good. Also changed APN back to fast.t-mobile.com as changing to b2b.tmobile.com didn't help

So my settings are:
identity crisis
fast.t-mobile.com ...

I just wanted to give a PSA for any of you struggling to get a VPN to work on your Cudy LT18. I recently purchased the LT 18 and loved it, at least until I attempted to add a VPN to it. It seemed that no matter what I did, it would not connect. I contacted Nord vpn and sent them the logs. They ...

Okay...well no one requested them, but since there were already 62 page views, I'm guessing someone must be interested.

This is the MR2100-100EUS (EU) model.

Some of these shots were very difficult to get in focus, since the case is smooth plastic. Also, some of the components have a protective ...

ALL THE OLD BUILDS ON THIS DEVICE HAVE LOCKED OUT APN, THE NEWEST BUILD HAS IT UNLOCKED BUT THE PROBLEM
IS AFTER YOU FLASH YOUR DEVICE YOU WON'T GET THE NEW BUILD AND MAYBE NOT EVEN IF YOU DONT FLASH IT.
ANYWAY, I MADE AN APN UNLOCK TOOL YESTERDAY WHICH I AM GIVING TO THE COMMUNITY TO USE TO FIX ...

I originally didn't want to say anything but I somehow got my Nighthawk M6 Pro MR6500 to run the MR6550 firmware and all the AT commands that don't work on the MR6500 latest update seme to work in there.
My nighthawk previously wouldn't work with OPENMEP after an update.
https://i.ibb.co/TH20mb1 ...

It's usually a simple solution to an elusive problem.
I always disable IPv6 both on the router's modem and LAN/WiFi interfaces, and the pc (just don't like IPv6 for some reason lol).
Then I set the DNS to 1.1.1.1 and 8.8.8.8 on both the router and pc's LAN/WiFi interfaces for better performance.
In ...

Ok here it is I circled it red for you, or for 9008 via fastboot use fastboot erase sbl

I got a couple of these a few days ago, they are nice but have some updated securities so it is a work in progress.
Please add to this thread anything you find about it.
I was able to make up an spk loaded thru fdt and also make some custom firmware for it to be loaded thru fastboot.
it has a 40 ...

OK update since yesterday I have now got then imei written (hard code only)
Now need to make some de-throttle files for it, it runs about 220mbps on tmobile here without dethrottle so
lets de-throttle it and see what it can do.
here is a vid showing the gal s22 imei I put on it and it running on ...

https://github.com/bkerler/edl/pull/637 - my pull request to sierra keygen with !OPENLOCK and !OPENCND keys

Codes for this cannot be calc yet but security can be bypassed and openmep can be enabled

will be nice to have keygen working to

AKosterin wrote: Sun Mar 16, 2025 5:03 pm https://github.com/bkerler/edl/pull/637 - my pull request to sierra keygen with !OPENLOCK and !OPENCND keys

@AKosterin These keygen seems working, passing openlock/opencnd, but Telnet does not seem working after mod done. Were you able to telnet to the device after mod?

Please stop the emails and messaging about this, here is the file I modified it with AKOSTERIN's commit it is temporary and does not have SDX65, I only added SDX75 to it to test with it so you should go to bkerlers git page and get the complete file
once edited by him.
I put that in the comments in ...

The InvisaGig fast 5G modem has a simple way to lock to cell tower cells, and when the scans can't find the cell you know exists, you can manually set it too. Watch the video for a full tutorial.

Network up and working. Don’t know if it had anything to do with it but I added serial number and rebooted.