WE1326 has become unresponsive

[jose.herrera]

my WE1326 has become unresponsive after updating it with the wifix firmware. only the Power LED is on and the corresponding port when plugged in but im unable to access what can I do?

[JimHelms]

It is most likely one of two reasons.

1. The wrong firmware version was used. There is a WE1326 and a WE1326V5. One will not work on the other. If you purchased from The Wireless Haven, you need the V5 version.

2. The Save Settings was checked. It must be unchecked when updating the firmware.

You will need to download the correct version and use the Firmware Recovery Mode to reflash it.

[jose.herrera]

It is most likely one of two reasons.

1. The wrong firmware version was used. There is a WE1326 and a WE1326V5. One will not work on the other. If you purchased from The Wireless Haven, you need the V5 version.

2. The Save Settings was checked. It must be unchecked when updating the firmware.

You will need to download the correct version and use the Firmware Recovery Mode to reflash it.

Thank you for the quick response. I was able to recover it via the link you provided. The Chinese page was different then the post but that's why we have google translate. Thank you!