Problems with TTL settings on gl-mt300n-v2 using Visible
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
Impressive_squirrel
- Posts: 3
- Joined: Wed Apr 21, 2021 2:03 pm
- Has thanked: 0
- Been thanked: 0
Problems with TTL settings on gl-mt300n-v2 using Visible
Hi everyone! I'm new here and I'm having some trouble with my Mango. I have my phone tethered to it via USB and I've put in the custom TTL settings in the firewall, I get good speeds on my laptop usually 30mbps and sometimes even above 60, but when I connect it to my ps4 I can never get past 2.4mbps for some reason. I've tried everything, I've tried so many TTL settings, I've used 65,64,117 and it seems like I'm still being throttled somehow and I honestly do not understand why. Any help would be GREATLY appreciated.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
-
Impressive_squirrel
- Posts: 3
- Joined: Wed Apr 21, 2021 2:03 pm
- Has thanked: 0
- Been thanked: 0
-
Dr-BroadBand
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Re: Problems with TTL settings on gl-mt300n-v2 using Visible
Found this it's for a PS5 but may help.
Well, I found my issue. Within the PS5 internet settings, I changed the mtu to 1473 and it cleared my issue.
Also found this for PS4
https://www.dualshockers.com/ps4s-tempo ... al-by-sony
https://weakwifisolutions.com/does-chan ... on-the-ps4
In networking MTU stands for Maximum Transmission Unit and dictates the maximum size for any packet of data that is sent from a device over a network. MTU is measured in bytes and has a maximum value of 1500, so an MTU of 1500 dictates that the largest packet of data that can be sent in one go from a device over a network is 1500 bytes.
Well, I found my issue. Within the PS5 internet settings, I changed the mtu to 1473 and it cleared my issue.
Also found this for PS4
https://www.dualshockers.com/ps4s-tempo ... al-by-sony
https://weakwifisolutions.com/does-chan ... on-the-ps4
In networking MTU stands for Maximum Transmission Unit and dictates the maximum size for any packet of data that is sent from a device over a network. MTU is measured in bytes and has a maximum value of 1500, so an MTU of 1500 dictates that the largest packet of data that can be sent in one go from a device over a network is 1500 bytes.
-
Impressive_squirrel
- Posts: 3
- Joined: Wed Apr 21, 2021 2:03 pm
- Has thanked: 0
- Been thanked: 0
Re: Problems with TTL settings on gl-mt300n-v2 using Visible
Dr-BroadBand wrote: Thu Apr 22, 2021 6:13 pm Found this it's for a PS5 but may help.
Well, I found my issue. Within the PS5 internet settings, I changed the mtu to 1473 and it cleared my issue.
Also found this for PS4
https://www.dualshockers.com/ps4s-tempo ... al-by-sony
Thank you so much! I tried changing the MTU but speeds are still 2.2 and below with both MTU settings. I also see at the bottom there's a message that says "Router in use may not support IP packet fragmentation" any clue as to what might be happening there?
https://weakwifisolutions.com/does-chan ... on-the-ps4
In networking MTU stands for Maximum Transmission Unit and dictates the maximum size for any packet of data that is sent from a device over a network. MTU is measured in bytes and has a maximum value of 1500, so an MTU of 1500 dictates that the largest packet of data that can be sent in one go from a device over a network is 1500 bytes.
-
Dr-BroadBand
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Re: Problems with TTL settings on gl-mt300n-v2 using Visible
Sounds like you need to up your game on the hardware
