Problems with TTL settings on gl-mt300n-v2 using Visible

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Impressive_squirrel
Posts: 3
Joined: Wed Apr 21, 2021 2:03 pm
Has thanked: 0
Been thanked: 0

Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Impressive_squirrel »

Hi everyone! I'm new here and I'm having some trouble with my Mango. I have my phone tethered to it via USB and I've put in the custom TTL settings in the firewall, I get good speeds on my laptop usually 30mbps and sometimes even above 60, but when I connect it to my ps4 I can never get past 2.4mbps for some reason. I've tried everything, I've tried so many TTL settings, I've used 65,64,117 and it seems like I'm still being throttled somehow and I honestly do not understand why. Any help would be GREATLY appreciated.
User avatar
Didneywhorl
Posts: 3646
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1370 times
Been thanked: 764 times
Contact:

Re: Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Didneywhorl »

So your phone is also Visible?
Impressive_squirrel
Posts: 3
Joined: Wed Apr 21, 2021 2:03 pm
Has thanked: 0
Been thanked: 0

Re: Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Impressive_squirrel »

Yes it is
Dr-BroadBand
Posts: 558
Joined: Wed Sep 23, 2020 8:52 am
Location: Texas
Has thanked: 94 times
Been thanked: 118 times

Re: Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Dr-BroadBand »

Found this it's for a PS5 but may help.

Well, I found my issue. Within the PS5 internet settings, I changed the mtu to 1473 and it cleared my issue.

Also found this for PS4
https://www.dualshockers.com/ps4s-tempo ... al-by-sony

:shock:

https://weakwifisolutions.com/does-chan ... on-the-ps4

In networking MTU stands for Maximum Transmission Unit and dictates the maximum size for any packet of data that is sent from a device over a network. MTU is measured in bytes and has a maximum value of 1500, so an MTU of 1500 dictates that the largest packet of data that can be sent in one go from a device over a network is 1500 bytes.
Impressive_squirrel
Posts: 3
Joined: Wed Apr 21, 2021 2:03 pm
Has thanked: 0
Been thanked: 0

Re: Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Impressive_squirrel »

Dr-BroadBand wrote: Thu Apr 22, 2021 6:13 pm Found this it's for a PS5 but may help.

Well, I found my issue. Within the PS5 internet settings, I changed the mtu to 1473 and it cleared my issue.

Also found this for PS4
https://www.dualshockers.com/ps4s-tempo ... al-by-sony




Thank you so much! I tried changing the MTU but speeds are still 2.2 and below with both MTU settings. I also see at the bottom there's a message that says "Router in use may not support IP packet fragmentation" any clue as to what might be happening there?

:shock:

https://weakwifisolutions.com/does-chan ... on-the-ps4

In networking MTU stands for Maximum Transmission Unit and dictates the maximum size for any packet of data that is sent from a device over a network. MTU is measured in bytes and has a maximum value of 1500, so an MTU of 1500 dictates that the largest packet of data that can be sent in one go from a device over a network is 1500 bytes.
Dr-BroadBand
Posts: 558
Joined: Wed Sep 23, 2020 8:52 am
Location: Texas
Has thanked: 94 times
Been thanked: 118 times

Re: Problems with TTL settings on gl-mt300n-v2 using Visible

Post by Dr-BroadBand »

Sounds like you need to up your game on the hardware
Post Reply

Return to “General and Unclassified”