Stuck in WCDMA/HSPA+

[Mattflexreed]

I'm using a wg3526 w/ a mc7455
Att unlimited plan

Signal Information
Network :
HSPA+

CSQ :
18

Signal Strength :
58%

RSSI :
-77 dBm

ECIO :
-4 dB

RSCP :
-82 dBm

Connection Monitoring Status :
UP (-) (using Ping Test)


Cell Information
MCC MNC :
310 410

RNC/eNB ID :
01E (30)

LAC/TAC :
DE3A (56890)

Cell ID :
1AA3 (6819)

LTE Band :
-

Channel :
-

Maximum Qos :
--

[Didneywhorl]

Post the output from AT!Gstatus?

[MattB29]

When I built my WG3526 with a EM7565 I had a similar issue. The problem is likely not with your setup but with how AT&T is handling it. For me I was using a Red Pocket data sim and I was able to get Red Pocket to resolve the issue with how AT&T was allowing it to connect. Nothing I did on my end would fix the issue.

[gscheb]

Would this help?
We can also set the modem to receive LTE only : at!selrat=06

Found it in this post : https://wirelessjoint.com/viewtopic.php?t=33#p107

[Mattflexreed]

So it fixed itself today after i reset it but i had to reset it because we had no internet

at!gstatus?
!GSTATUS:
Current Time: 415 Temperature: 52
Reset Counter: 1 Mode: ONLINE
System mode: WCDMA PS state: Attached
WCDMA band: WCDMA 850
WCDMA channel: 4385
MM (CS) state: IDLE NORMAL SERVICE

WCDMA L1 state:L1M_DCH LAC: DE3A (56890)
RRC state: CELL_DCH UTRAN Cell ID: 001E1AA3 (1972899)
RxM RSSI C0: -80 RxD RSSI C0: -79
RxM RSSI C1: --- RxD RSSI C1: ---


OK

[Mattflexreed]

Now after i did at!reset its back to wcdma/hspa+