Hey everyone
After some advice and progress, I feel like I’m close to getting the setup working.
As of right now my equipment is:
Archer C7 (v5 based on bottom of router) - Flashed with the latest supported version of r00ter.
A CBA850 with a t-mobile unlimited prepaid SIM card.
—
I can confirm that the CBA is working because when connected directly to my PC the internet works. It just gets throttled because of TTL issues.
As for the C7 the admin page does load up and I was able to configure it based on the recommended tutorials.
When the CBA is in either LAN 1 or 2 and connected to the WAN of the Archer both admin pages come up. I can access and log in to both pages but
The internet does not work.
—-
I suspect the issue is because
On the routers (C7) Modem > Network Status it shows that it could not locate the modem.
I believe that’s causing the internet not to work...
I tried to resolve it by following some of the steps online... I removed the CBA from its container and reset up all the pig tails but no luck.
I flashed the router multiple times without syncing settings. I even reset the CBA850...
Can anyone help me get this missing piece to work?
At this point I would be willing to pay whoever can take the time to walk me and my partner through it. Thank you!
Attaching logs just in case...
Archer C7 R00ter can’t find CBA850
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
catchsm0k3
- Posts: 30
- Joined: Sat May 09, 2020 8:22 pm
- Has thanked: 2 times
- Been thanked: 0
-
catchsm0k3
- Posts: 30
- Joined: Sat May 09, 2020 8:22 pm
- Has thanked: 2 times
- Been thanked: 0
Re: Archer C7 R00ter can’t find CBA850
Pictures of the issue and the system logs
You do not have the required permissions to view the files attached to this post.
-
catchsm0k3
- Posts: 30
- Joined: Sat May 09, 2020 8:22 pm
- Has thanked: 2 times
- Been thanked: 0
Re: Archer C7 R00ter can’t find CBA850
For those coming in the future!
I was able to resolve the issue by removing the USB modem out of the CBA850 and plugging the USB directly in the archer a7 and it was picked up and is working
I was able to resolve the issue by removing the USB modem out of the CBA850 and plugging the USB directly in the archer a7 and it was picked up and is working
-
Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Archer C7 R00ter can’t find CBA850
I would bet that if you tagged the WAN port of the Archer as untagged in VLAN 1 and off in VLAN 2 it would work.
-
catchsm0k3
- Posts: 30
- Joined: Sat May 09, 2020 8:22 pm
- Has thanked: 2 times
- Been thanked: 0
Re: Archer C7 R00ter can’t find CBA850
How would I be able to do that?Didneywhorl wrote: ↑Fri Jul 31, 2020 9:56 pm I would bet that if you tagged the WAN port of the Archer as untagged in VLAN 1 and off in VLAN 2 it would work.
-
Viper67857
- Posts: 166
- Joined: Wed May 13, 2020 7:04 pm
- Has thanked: 12 times
- Been thanked: 45 times
Re: Archer C7 R00ter can’t find CBA850
It's in the firewall settings... Probably also would have worked had you left stock firmware on the Archer instead of goldenorb. I wouldn't worry about it since you have it working, though.
Basically, since the 850 is a router in itself, you didn't need goldenorb to do the modem stuff, and it won't see a modem inside another router. Now with the modem directly connected to the goldenorb router's USB port, you have better control over it and all is well, so I'd leave it be.
Basically, since the 850 is a router in itself, you didn't need goldenorb to do the modem stuff, and it won't see a modem inside another router. Now with the modem directly connected to the goldenorb router's USB port, you have better control over it and all is well, so I'd leave it be.
