Wireless Joint

Turns out that won't help and here's why. Old EM9190 SKU: 1104567 Old EM9191 SKU: 1104629 This modem will not have all the bands that are advertised. The affected bands are as follows: LTE B43, 5G NR n7, n8, n12, n20, 25, n38, n40, n48 New EM9190 SKU: 1104902 New EM9191 SKU: 1104903 New EM919x SKUs ...

lol
Be strong grasshopper

I setup SmoothWAN on two systems using GL.iNet Slate and Flint routers. One one system, I have a DSL line and a NEX6GO as internet inputs and the other has two NEX6GO routers with EM12 modems as internet inputs. They both work well. One thing to note is that even though the two internet sources are ...

Yeah they did, not sure if its better than the other one but the usb c should be faster theoretically I guess. If you have the 4G version you can upgrade to it for $630 plus shipping, if you have 5G version its much cheaper. You rebel lol, might give it a try if I'm feeling adventurous.

Alright thank you, once again I appreciate the help and answering all my questions, hopefully everything will work out

Thank you for your reply.

Another big THANK YOU to Didneywhorl and others in this post! I'm pretty much a newbie as far as this lte router /modem stuff goes, but I easily updated my EM160R firmware with these instructions. I'm using the WG1608 router combo with ATT tablet plan, and the darned thing likes to disconnect once ...

Didneywhorl wrote: ↑Fri Mar 31, 2023 9:39 am The image is mislabeled primary-secondary.

I would connect 2x2 mimo to ANT0 and ANT3. Those two cover all bands. ANT1 and ANT2 do not.

Wow Thanks for the correction...will do that thank you

Modified Tenbay T-MB5EU v01 dts as its compadiable with ZBT-Z2101AX "4 port 3xlan 1xwan"
build was modified to "make -j13" for faster build on 12 core CPU
SYSTEM config edit for led fix

https://1drv.ms/f/s!Ao8qYENaIhxLlvJZ9rb ... w?e=gag2YM

To assist our members with updating the firmware and/or repairing the IMEI on the EM9191 and EM9190, I put together a kit to help simplify the process. The kit contains a script along with a collection of the firmware it uses. As with any information on this forum, use at your own risk. Download ...

To assist our members with updating the firmware and/or repairing the IMEI on the EM9191 and EM9190, I put together a kit to help simplify the process. The kit contains a script along with a collection of the firmware it uses. As with any information on this forum, use at your own risk. Download ...

Thank you!! This info helped and I got it all working now!!

A little update, after just over a month I'm noticing infrequent disconnects again. Usually happening at peak times or 3am 2-3 times a week. Something I've learned that isn't completely obvious is that your SINR needs to be POSITIVE for a stable connection. Seeing a negative dB measurement is fairly ...

@Didneywhorl - I ordered one. Looking forward to getting it set up!

John

I've heard from a lot of people with problems with the Qualcomm version of that router. Usually wifi and reboots related. The mediatek version seems to work pretty well. The wireless haven mods their mediatek version and call it the NEXPRO. Make sure you turn off the auto apn of the modem (at ...

Didneywhorl wrote: ↑Mon May 08, 2023 11:17 am Might need a modem firmware update. Tmobile has changed a lot in the last year.

Ok thanks! I'll give that a whirl.

Also thanks mods for putting my post in the correct spot, I didn't know what the issue was so I didn't know where to put it.

Any particular reason to disable ipv6? Honestly mostly for troubleshooting. I'm having a weird interment issue where webpages aren't loading. Refreshing, sometimes multiple times, fixes it. but it effects services to, like discord, xmpp, ect. because they keep losing connection. At first I thought ...

+1 to comments above. I've not been involved in the testing/dev but have know about it for a while and have been anxiously waiting for it. I have 2 on their way here now. My biggest benefit will be a single device powered over POE in an enclosure on the roof. Saves money in bypassing the router ...

Didneywhorl Yeah when I first saw it I was like I can't wait until there's more info about this thing. I feel like I would have bought this first ha ha. I didn't think it was overpriced but I could see what they were saying, I think they did like the ease of use that it has but like you said they ...

I think I might have figured it out. In the modem configuration on CBA850 (in the Connection Manager), you can enter AT commands. So far, it looks like by adding the "at!band=13" command in this field seems to be working. For the sake of others, follow the usual steps of creating a "band reference ...

You mean like on the transformer itself? There doesn't appear to be one, this is the one that came with the IG unit. There is a power LED on the unit and since I have it elevated I didn't notice if it was on or off when it went dead before. So far it's been running fine for the last couple days, so ...

I guess my thought is, why go cheap? thats like putting cheap tires on a bmw m5 competition... personally, I save and purchase the right equipment once... learned my lesson many moons ago have to fiddle extensively with "cheap" purchases.

Thank you sir! We have hope of having internet once again to have internet

So I looked inside the 9-10-2021 firmware and I randomly (I have so many versions to choose from now, downloading so many builds, lol) chose 10-15-2022 to compare it against, and there are some major differences. I came upon this thread https://wirelessjoint.com/viewtopic.php?p=2600#p2600 showing ...

Before starting, I was banging my head on the table because I never had a copy of my original firmware. I regretted not using that MTD option to pull a copy of the ROM. Something I can revert back to if all else fails. Luckily by finding that firmware, all is good and I have more confidence to try ...

I appreciate both of your responses. I could finally sit down and try to update the firmware to the version linked above this past weekend. I had a heck of a time even pulling up the recovery mode page, as the LAN ports started to do the same thing when accessing it normally. I was finally able to ...

Ahh okay, I thought that was what you meant, not sure I'm comfortable doing it but thank you for the suggestion and I appreciate the help.

will check the bottom of the router when i get home and post the results here,

Apparently it's inordinately fond of https (which works too).
https://www.temblast.com/edl.htm

Hi w1lliam, 1. you are violating my license, which is GPLv3. You are publishing an exe based on my opensource code, which means you need to also publish the full source code, which also has to refer to the GPLv3 license. 2. My source code is available at https://github.com/bkerler/edl 3. Currently ...

I did just try an EM7565 and still no USB or ethernet activity.
Also tried a different PSU just in case.
I'm pretty sure this is just DOA at this stage and will try and process a return with Aliexpress seller.

Thanks folks for your input here. Windows didn't prompt for any device drivers when connected hence my conclusion the USB port was dead. Without being able to communicate to the modem and enter T commands I can't activate the RJ45 port. I've opened a request with the seller for a return ...

Bit of a double post here, too, but I wanted to address things separately. I think there may be some misunderstanding as to the purpose of this device. This device is a simple gateway, which means you will also need some kind of a router device behind it if you want to connect more than one device ...

Ahh okay, I thought that was what you meant, not sure I'm comfortable doing it but thank you for the suggestion and I appreciate the help. Couple other options, if you're interested: T-Mobile is all no-contract. So there's that. T-Mobile business internet is available to almost anyone for $55/mo ...

The good news is the Mcuzone 5G to RJ45 board worked out of the box, modem shows up on my Mac immediately. It's a dead board from China but at least now I have a functioning board to create a video as requested to get a refund or replacement with.

That's the way I had done it.

Took it back to factory and navigated to flash the new firmware, then flashed 2 more times.

I'll do it once more to see if it might help, but this is the same issue I have been having since day 1

I wish there was more definitive information on this mod. I tried these connectors to internal ports 3 & 4, but they didn't click on properly and I put it down to 'cheap' connectors from China. https://www.aliexpress.com/item/32870236862.html MS156-SMAF.jpg Then I removed the steel spring sleeve ...

Those all look like they are on the lan side and have nothing to do with the 'internet' connection. Try new lan cable or check all connectors/adapters between router and pc/switch? Usually when i've seen this on lan side I had water in a connector. Could be too long of a run of cable and dropping ...

In this discussion, we are discovering the transformative potential of VPN on router as we delve into setup, benefits, and troubleshooting. Join discussions on optimizing network-wide privacy, accessing geo-restricted content, and securing all connected devices. Whether you're new to router-based ...

The fix for my problem was that t-mobile changed something where they started denying service if the IMEI was not the IMEI of the supplied hotspot. Magic was done on the Cudy and it instantly worked.

Setup used:

Huh. Flash a much older version then. It's not locked. Unless V1 firmware really doesn't work on V2. Thank you so much for your help. I'm back on an old V2 firmware, and there are no password on the page http://192.168.10.1/cgi-bin/luci/admin/network/gcom/atcmd . However, when I input a command ...

Figured out the problem. Quectel put out a new protocol for their modems and the mobile DVR we use didn't have the correct firmware to compensate for it. Got a firmware update from the company and we're back in business. Thanks for the help!

Our NEXP1GO drops once per day...or sometimes once every two days. I have the scheduled reboot set for 3:45AM every morning, but the disconnect usually happens into the night after/around 10:30PM. I have specific bands selected (2,4,5,13,66) and additionally have the Cell Lock to B66. My suspicion ...

Okay, N71 is pretty much the only usable band in my area. Any advice on how to automate the router taking care of this issue instead of me finding out we have no internet, logging in and rebooting the router? Appreciate the help so far btw.

Didneywhorl wrote: ↑Wed Sep 13, 2023 8:10 pm ...you have to remove the InvsisaGig case to get clearance.

Would that void the warranty? Maybe this is an opportunity to bring an enclosure that is purpose-made for the InvisaGig to market. More in keeping with the "Super Simple" mantra, if nothing else...

@Didneywhorl Nice! It's really cool to see such thoughtful features in a day when so many products seem to be so poorly thought out and/or executed!

Are you also working with the BPI3 mini? I have whatever is in the prebuilt modem you guys sent me. My order #xxxxx Not what I meant :) There is a user on another forum for a SBC, like the raspberry pi, that has a similar username as yours. I checked though, different username :) Oh gotcha. No, I ...

This is where I'm going to drop this-? Hello ALL, Just wanted to share, and give a big shout out to Richard at the WH. I have been testing, (playing) with LTE since 2019-means nothing, cause I started late in life LOL I had Richard build me a IG in an enclosure, that replaced an 3526P, with a em160 ...

I spoke with him, and another gentleman. Along with your help I got it all finished and straightened out. There was a typo that caused me to do that, but thank you for your help so very much I greatly appreciate it

Thanks! Got my pre order in.

@Didneywhorl Okay thank you, I've seen a couple different ways of plugging it up so I got confused a little bit. One way was how you have it but antenna 2 and 4 were switched. I also saw 1:2 2:3 3:1 4:0, I was like which one do I do ha ha.

Would you mind sharing the info on how to make the LT18 work with a Verizon Phone SIM? I don't know what the correct AT command is ? I sent you a pm with the info. Were you able to get it taken care of? I never received a pm back from you. Is this the correct procedure? http://cudy.net/cgi-bin/luci ...

Well, glad I posted. It was in fact me typing 255 instead of 225. I had never thought about it before but those two numbers look a lot alike. I can't believe the trouble I went through trying different systems etc... All because of misreading a single number in the instructions. May others find this ...

Nice! Would be great to have an X65 option.

I'm pretty happy with my current setup using NEXS2GO router and Sierra EM9191 modem with Calyx - getting about 100 mb/s speeds on average. I used to travel in my RV full time, and so needed a portable Internet option. It's crazy how when you're in a super good 5g spot you can get upwards of 300 mb/s ...

Placed an order on circledin.com to join a plan for a new sim and packed up the kvd21 for return if TMO even wants it back since they just upgraded to the new sage boxes which presumably have better modems inside. It's $53/mo with unlimited data and 50GB of tether if needed. This should unlock ...

I think I figured out the VPN issue. Seems for some reason it's not adding the routes when connecting. I think the app is looking for traditional nic interfaces to bind them to and the metric for the wwan is 700 when a wired connection is 0 or 1. Might have to script a lower metric assigned to the ...

I'm not an rv'er. But I've heard tons of stories about people reading that the campground they rented a space at had public wifi. But when they got there it so overloaded it was essentially useless. If internet access is critical you're going to want to have a line with all 3 major carriers. Even ...

Finally got the eSIM worked on on the phone for the new plan. Speeds on the phone are almost 500mbps DL / 65mbps UL which is about 100mbps+ DL and about double UL. Just need to head to the store and pick up a pSIM to use in the modem and make sure it works as a phone by putting the phone IMEI onto ...

Tried to change the APN on the modem and it was being difficult so did a factory reset on it and it came online w/o further configuration. Testing now to see if I need to bother with the TTL since it's showing just normal phone use on the TMO dashboard at the moment. Then again there seems to be a ...

Man I've been on a journey finding the right antenna solution. I researched everywhere, asked tons of questions, and inevitably was directed to Wireless Haven. I was really having a hard time deciding between the 4x4 MIMO Signal Brick omni-directional, and the 2x2 MIMO Panel Blaster. I think we're ...

Didneywhorl wrote: ↑Thu Dec 21, 2023 8:30 am @APMI23

Did you mean to quote the whole post then not put anything of your own?

sorry my question got moved into the body of the original post, fixed.

I am running it as of yesterday, I was also running the BETA version of 1.0.9 prior to that. No issues with either.

I could not figure out how to post a New Topic
so move this to the right place if you would

Has anyone got the NEW UPDATE yet
I got it on Christmas Morning
version number v1.0.10

[Mod note: Moved to new topic]

I made an account just for this, I'm having the same issue after receiving my invisagig today. It just shows a black screen, I did update the firmware to 1.0.10 and toggle dark mode beforehand. Is there any fix or a way to factory reset it? Really would like to use it I find that if I set the PCs ...

Got it working, using wireless.dish.com, I ended up just letting the sim activate with another sierra modems imei, worked fine after, also turns out the modem I cloned from the phone, was dead/dying it stopped being seen altogether.. either way, thank you for your help and seems to be working as it ...

Interesting little piece of mail showed up today. TMO sent the bill to collections even though they still haven't sent the prorated final bill for the cancellation which was 12/21. Just one more thing to deal with in cleaning up things post mortem. So far the voice line is doing well though with ...

Went and took care of the bill w/o returning the KVD and the prorate was ~$45. No NRF on the bill for the KVD non-return even a month after cancel. TMO is a bit odd considering the bill sent to collections but no charge yet for the GW. First full month of hammering the new modem resulted in ~1TB of ...

$50

Used, no modem included. Will come with power cable and antennas.

Selling a sweet 4G/5G setup. Ready to go just needs sim card. Have used with ATT, Verizon and Visible with great results. I was using external antennas but can include the small individual antennas with the usb enclosure. Power cords and sata cable included as well. Everything - $250 Or individually ...

BananaPi R3 purchased from Amazon with kit. Rooter flashed to memory so ready to go. Includes EM7565 and whole setup works great. Have tested on ATT, Verizon and Visible. Power cord and antennas included.

$160

Screenshot 2024-01-24 at 12.12.13 PM.png

Yes sorry!! It's a Banana Pi R3 not R4

Thank you very much
Ordered pigtails SMA to TS9
Will look into the ports on the router

I get moire or less the same problem. Did you solve it? I'm looking to install a newer firmware, did you do that? If so, where can I find one? First you need to determine the actual cause for the connection drop, which can be caused by several factors. 1. Failing router hardware 2. Failing modem ...

Search found more than 1368 matches