Updating GO Firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Updating GO Firmware
I have been trying to update the Golden Orb (Rooter) firmware on my routers. No problem with my TP-Link A7 and GLInet 1300. When updating my Linksys WRT3200ACM and Miktotik GR750 I was unsuccessful. Neither one of those will work anymore. I can't even access them at all. What did I do wrong? I am not sure what to do next
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Updating GO Firmware
Recovery mode should be available on all devices with Rooter previously installed. SHOULD.
Power down, hold in reset button, power on, wait 12 seconds, release reset button, log in to 192.168.1.1.
Might need to manually assign pc interface to 192.168.1.x subnet.
Last resort is UART/TTL serial interface.
Power down, hold in reset button, power on, wait 12 seconds, release reset button, log in to 192.168.1.1.
Might need to manually assign pc interface to 192.168.1.x subnet.
Last resort is UART/TTL serial interface.
