I am looking at a used CradlePoint IBR900 on ebay. My concern is that if the history on the device is not known, and it is currently tied to an active NetCloud subscription is it still possible to to a factory reset, and downgrade to a non-netcloud firmware. Or will the unit always try and re-connect to the netcloud service? If anyone has any experiance in the area that would be super help full, thanks!
David
IBR900 CradlePoint Firmware
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: IBR900 CradlePoint Firmware
Interesting question, I'd also like to know. Hopefully someone experienced with this will chime in.
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: IBR900 CradlePoint Firmware
dsstewa wrote: Mon Jul 06, 2020 10:08 am I am looking at a used CradlePoint IBR900 on ebay. My concern is that if the history on the device is not known, and it is currently tied to an active NetCloud subscription is it still possible to to a factory reset, and downgrade to a non-netcloud firmware. Or will the unit always try and re-connect to the netcloud service? If anyone has any experiance in the area that would be super help full, thanks!
David
Cradlepoint has closed source software and locked bootloader which only accepts their own signed firmware.
If you're looking for tinkering, you may want to look elsewhere. Besides, they are overpriced compared to similar or better OpenWRT routers.
