I can input at commands although they disappear as I type them so I have to copy/paste them in and hit enter real fast so that they are accepted. I have tried several commands but the only response I get to any of them are
Code: Select all
Fri Feb 21 20:27:06 2020 : /dev/ttyUSB Can't open device /dev/ttyUSB.This leads me to believe that the m.2 card I received is bad. But before I threw my hands up I decided that maybe the screws were touching the board and shorting it out thus making it not work correctly so I shaved down the screw heads with a dremel. Still not able to see the modem. I tried resetting the wifix firmware to a fresh install. Same problem. I checked every thread on these forums for similar problems and the closest thing I could find was people having issues with losing their command capability from imputing the 7455 at commands on the 7565. I perused a rooter thread on the issue linked from this forum and looked into putty but could never connect as I dont know how to use the Huawei tool to locate my com port so I decided not to go any further with that.
So at this point I have a new M.2 board ordered from The Wireless Haven and a USB To M.2 (NGFF) Adapter in case I need it for anything. SO before the new board gets here is there anything I can do to troubleshoot the device in case my assumptions are wrong and its a software issue.
Currently using we826-GO2019-11-16-upgrade.bin. As I understand it that should have any drivers needed for the new modem.
What I dont know is if the pci-e to m.2 add-on board needs a driver to be loaded onto the wifix software in order for the router to see the modem. If thats the case does anyone know where to point me so that I can figure out how to do that?
