Quectel EC25 AT COMMANDS
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
tajones999
- Posts: 5
- Joined: Fri Feb 07, 2020 11:30 pm
- Has thanked: 0
- Been thanked: 0
Quectel EC25 AT COMMANDS
I am so new to this please be patient. I am trying to send AT Commands to my Quectel EC25-AF. There are two towers down in my area on AT&T and I would like to block out those bands. I would like to scan band 12/17/4. I purchased a booster for band 4 and I see no improvement. Any help would be GREAT!
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Quectel EC25 AT COMMANDS
Im not sure what you need. All the AT commands? The one to lock to certain bands? Im cornfused easily.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
-
tajones999
- Posts: 5
- Joined: Fri Feb 07, 2020 11:30 pm
- Has thanked: 0
- Been thanked: 0
Re: Quectel EC25 AT COMMANDS
This is an ebay item number 133245707513, tell me the truth. But I want to send at commands to ec25-af, I saw where you could restrict the scanning of specific bands. So I guess if I restrict all the bands that I do not want, then it should leave me with the only one I want. ? How to send those at commands...
THANKS
THANKS
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: Quectel EC25 AT COMMANDS
tajones999 wrote: Sat Feb 08, 2020 11:09 pm This is an ebay item number 133245707513, tell me the truth. But I want to send at commands to ec25-af, I saw where you could restrict the scanning of specific bands. So I guess if I restrict all the bands that I do not want, then it should leave me with the only one I want. ? How to send those at commands...
THANKS
You don't restrict/lock out bands, instead you set a band or a list of bands you want the modem to use.
For example to lock the modem to a single band 66, you would send this command:
AT+QCFG="band",2e0,20000000000000000,0
For other bands, you would use a band calculator found in the tutorials section on this forum.
As far as signal boosters go, they are not as effective as some sellers lead you to believe, in most cases a booster will only boost a bunch of useless noise. You're better off picking up a high quality/gain Yagi or flat directional antenna from the thewirelesshaven.com store which comes with full support by the owner JimHelms.
-
tajones999
- Posts: 5
- Joined: Fri Feb 07, 2020 11:30 pm
- Has thanked: 0
- Been thanked: 0
Re: Quectel EC25 AT COMMANDS
I am going to look around that site, wish I knew better. But how to send those at commands to ec25-af?
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: Quectel EC25 AT COMMANDS
tajones999 wrote: Sat Feb 08, 2020 11:55 pm I am going to look around that site, wish I knew better. But how to send those at commands to ec25-af?
You can send AT commands through the GodenOrb/WiFix or Huawei/PUTTY terminal, depending on your modem's connection method. https://wirelessjoint.com/search.php?keyword ... d+guide%22
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Quectel EC25 AT COMMANDS
How are you using the EC25? In a router? What router? In a usb adapter? Etc
-
tajones999
- Posts: 5
- Joined: Fri Feb 07, 2020 11:30 pm
- Has thanked: 0
- Been thanked: 0
-
tajones999
- Posts: 5
- Joined: Fri Feb 07, 2020 11:30 pm
- Has thanked: 0
- Been thanked: 0
Re: Quectel EC25 AT COMMANDS
Will Golden Orb replace Intelligent Router? Intelligent Router is what comes up when logged in, name of software?
