Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here.
I've translated the recovery page so you can see what is what.
Chinese screen
English screen
WE | WG Recovery Mode Chinese Language
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
WE | WG Recovery Mode Chinese Language
You do not have the required permissions to view the files attached to this post.
- These users thanked the author Dairyman for the post (total 3):
- Jim Helms (Mon Jul 16, 2018 8:37 pm) • dajmanjt (Fri Aug 10, 2018 11:45 am) • Viper67857 (Thu Jul 16, 2020 9:15 am)
-
serverside
- Posts: 88
- Joined: Wed Jul 11, 2018 3:02 pm
- Has thanked: 2 times
- Been thanked: 7 times
Re: WE | WG Recovery Mode Chinese Language
I need to take photos of mine as they have a new screen on the WG3526.
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 328 times
- Contact:
Re: WE | WG Recovery Mode Chinese Language
farberm wrote: Tue Jul 07, 2020 10:04 pm Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router
I've noticed that the latest version WG3526 bootloader, no longer requires the IP to be set to a specific value on the pc.
Unplug the power cable, hold down the reset button, inset the power cable, count to 5 seconds, release the reset button then go to > http://192.168.1.1/index.html < This is important, not just 192.168.1.1!
Click the large button in the middle of the screen, select the file, and wait till the flashing has finished.
Here's a detailed guide of the above.
viewtopic.php?p=6007#p6007
- These users thanked the author BillA for the post (total 2):
- Viper67857 (Thu Jul 16, 2020 9:16 am) • dieselfumes (Mon Nov 14, 2022 8:43 pm)
