WE | WG Recovery Mode Chinese Language

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Dairyman
Posts: 31
Joined: Fri Jun 22, 2018 12:22 pm
Has thanked: 0
Been thanked: 4 times

WE | WG Recovery Mode Chinese Language

Post by Dairyman »

Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here.

I've translated the recovery page so you can see what is what.

Chinese screen
flash_cn.jpg
English screen
flash_en.jpg
You do not have the required permissions to view the files attached to this post.
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WE | WG Recovery Mode Chinese Language

Post by serverside »

I need to take photos of mine as they have a new screen on the WG3526.
farberm
Posts: 38
Joined: Wed Mar 14, 2018 6:32 am
Has thanked: 0
Been thanked: 1 time

Re: WE | WG Recovery Mode Chinese Language

Post by farberm »

Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router
User avatar
BillA
Posts: 1230
Joined: Sun Dec 01, 2019 6:46 pm
Location: USA
Has thanked: 219 times
Been thanked: 327 times
Contact:

Re: WE | WG Recovery Mode Chinese Language

Post by BillA »

farberm wrote: Tue Jul 07, 2020 10:04 pm Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router

I've noticed that the latest version WG3526 bootloader, no longer requires the IP to be set to a specific value on the pc.
Unplug the power cable, hold down the reset button, inset the power cable, count to 5 seconds, release the reset button then go to > http://192.168.1.1/index.html < This is important, not just 192.168.1.1!
Click the large button in the middle of the screen, select the file, and wait till the flashing has finished.
Here's a detailed guide of the above.
viewtopic.php?p=6007#p6007
Post Reply

Return to “General and Unclassified”