WG3526 connected to internet via MC7455 but not wifi or lan internet

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

So as title says, shows the mc7455 is connected but it's not sending internet to the lan or wifi connection. I have the same setup just with a USB dongle and Archer c7 and it works. Anyone have any ideas what's up?
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

What firmware and build are you using on the router?

What carrier?
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Verizon and the latest on the rooter site. I used your guide to the T. Worked great for getting the card to connect, it just doesn't share out the internet.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

This is what I would try.

Download THIS firmware build.

Go to SYSTEM > BACKUP/FLASH FIRMWARE > FLASH NEW FIRMWARE IMAGE > BROWSE to the build just downloaded.

Then, and very important, make sure before you click the FLASH IMAGE button, that the KEEP SETTINGS box is UNCHECKED.

Once it comes back on line, go to MODEM > CONNECTION INFO > APN and enter your APN and SAVE.

Do not make any other changes to the WiFi or another other settings.

Unplug the power from the router and wait a few seconds and plug it back in.

Then, see what happens.
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Sat May 19 11:39:43 2018 user.notice MBIM Connect: Query radio state
Sat May 19 11:39:46 2018 user.notice MBIM Connect: Reading capabilities
Sat May 19 11:39:46 2018 user.notice MBIM Connect: Check PIN state
Sat May 19 11:39:46 2018 daemon.notice netifd: wan1 (7094): required pin: 3 - pin2
Sat May 19 11:39:46 2018 daemon.notice netifd: wan1 (7094): remaining attempts: 3
Sat May 19 11:39:46 2018 user.notice MBIM Connect: PIN unlocked
Sat May 19 11:39:46 2018 user.notice MBIM Connect: Checking subscriber
Sat May 19 11:39:46 2018 user.notice MBIM Connect: Register with network
Sat May 19 11:40:49 2018 user.notice MBIM Connect: Subscriber registration failed
Sat May 19 11:40:49 2018 user.notice root: mbim bringup failed, retry in 15s
Sat May 19 11:41:04 2018 user.notice MBIM Connect: Stopping network
Sat May 19 11:41:07 2018 daemon.notice netifd: wan1 (9162): Command failed: Permission denied
Sat May 19 11:41:07 2018 daemon.notice netifd: Interface 'wan1' is now down
Sat May 19 11:41:07 2018 daemon.notice netifd: Interface 'wan1' is setting up now


So nothing, so I checked the System log and this is happening.

Trying to figure out what it means.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

It looks like the network is not letting you register. Are you using the correct APN for the service that the SIM card is provisioned under?

What do you get when you run the following commands:

Code: Select all

at!entercnd="A710"
at+cpin?
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

The cpin command just states ready
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Prior to posting this thread I fully reset the mc7455 and registered it mbim with vzwinternet as the APN as is with the phones APN.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

The ready means we can generally eliminate an issue with the modem not reading the SIM. But for whatever reason, you are being kicked off the network.

Disable Connection Monitoring for now.

Go to > Modem > Debug Information > AT Command Execution and using the right bottom corner of the window, expand it where the window is larger. Then copy and past what is in the window
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

I pulled the Sim to put it back in the phone but it's like your normal info that comes up band 13 temp sinr etc. The thing I did notice was it wasn't updating. I would have to run the at!gstatus? Command.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

And you are certain that the APN is correct? If not 100% certain, then that needs to be checked.

Verizon also has more than one APN. And, if you are using one of their resellers, then they will mostly use a different APN.
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Hmm I mean I can pull the phone again and check the APN it's connected to. Would it be the same?
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

If the phone gets data service then I would check it again.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

These are a few I came up for Verizon.

Code: Select all

vzwims
    Used for connections to IMS services. Required for TXT messaging. 
vzwadmin
    Used for administrative functions. 
vzwinternet
    Required for general Internet connections. 
vzwapp
    Required for PDA data service 
vzwcf
    Used for connections that must be routed through content filtering. 
xx.vzwentp
    Used for connections to mobile private networks.
    Note 'xx' would be replaced by the enterprise MPN identifier. 
xx.vzwstatic
    Used for static IP connections.
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Well damn, TRACFONE.VZWENTP

All caps on the phone. Do I need to drop it to lower case or leave it caps with a full reset to TRACFONE.VZWENTP on the mc7455?
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

Leave it just like it is. Just make sure it is entered correctly.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

After you enter the APN, reboot the router.
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

Did that do it?
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

Haven't had a chance to get inside. Will update you in a little bit.
serverside
Posts: 88
Joined: Wed Jul 11, 2018 3:02 pm
Has thanked: 2 times
Been thanked: 7 times

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by serverside »

That did it! I'm online! Can't believe I missed that, I've set this thing up multiple times, can't believe I missed something so simple.

Thanks for all the help!
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by JimHelms »

serverside wrote: Thu Jul 12, 2018 10:27 pm That did it! I'm online! Can't believe I missed that, I've set this thing up multiple times, can't believe I missed something so simple.

Thanks for all the help!
You are welcome. It is most always something simple and over looked. Glad you are up and running.
RadioRiot
Posts: 2
Joined: Sun Mar 14, 2021 5:58 am
Has thanked: 0
Been thanked: 0

Re: WG3526 connected to internet via MC7455 but not wifi or lan internet

Post by RadioRiot »

So I know this is an old post but I'm pretty much having the same problem. I'm using a we826-T+EP06-A. The router is connected to the internet but the LAN port does not have access. Here is a copy of my log info:

Code: Select all

 Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: * Product=EP06-A 2c7c 0306
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: * This device does not have a switch data file
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: * Product=EP06-A 2c7c 0306
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:37 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:38 2021 kern.notice kernel: [   72.689919] random: crng init done
Sun Mar 14 10:41:38 2021 kern.notice kernel: [   72.693411] random: 6 urandom warning(s) missed due to ratelimiting
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: * Switched to : 2c7c:0306
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:47 2021 user.notice Log Print : Driver Name : 1 option
Sun Mar 14 10:41:47 2021 user.notice Log Print : Driver Name : 2 option
Sun Mar 14 10:41:47 2021 user.notice Log Print : Driver Name : 3 option
Sun Mar 14 10:41:47 2021 user.notice Log Print : Driver Name : 4 option
Sun Mar 14 10:41:47 2021 user.notice Log Print : Driver Name : 5 qmi_wwan
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: * ProtoFind returns : 2
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: *****************************************************************
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: Found Modem1
Sun Mar 14 10:41:47 2021 user.notice usb-modeswitch: Connecting a QMI Modem
Sun Mar 14 10:41:47 2021 user.notice Create Connection: Start QMI Connection
Sun Mar 14 10:41:53 2021 user.notice Create Connection: QMI Comm Port : /dev/ttyUSB2
Sun Mar 14 10:41:53 2021 user.notice Create Connection: WDA-GET-DATA-FORMAT is "raw-ip"
Sun Mar 14 10:41:56 2021 user.notice Create Connection: Quectel Unsolicited Responses Disabled
Sun Mar 14 10:42:07 2021 user.notice Get Profile: Default Profile Used
Sun Mar 14 10:42:08 2021 user.notice Create Connection: Profile for Modem1 sets interface to WAN1
Sun Mar 14 10:42:08 2021 user.notice Create Connection: Modem1 is using WAN1
Sun Mar 14 10:42:09 2021 user.notice Create Connection: Pincode in script
Sun Mar 14 10:42:09 2021 user.notice Create Connection: Attempting to Connect
Sun Mar 14 10:42:16 2021 user.notice sms process: SMS Supported
Sun Mar 14 10:42:22 2021 user.notice QMI Connect: WDA-GET-DATA-FORMAT is "raw-ip"
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: Waiting for network registration
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: Starting network RESELLER
Sun Mar 14 10:42:24 2021 user.notice sms process: Reread SMS Messages on Modem 1
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: Connection returned : -923844864
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: status is "connected"
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: GET-CURRENT-SETTINGS is {"pdp-type":"ipv4-or-ipv6","ip-family":"ipv4","mtu":1430,"ipv4":{"ip":"10.134.151.196","dns1":"172.21.0.83","dns2":"172.21.0.84","gateway":"10.134.151.197","subnet":"255.255.255.248"},"ipv6":{},"domain-names":{}}
Sun Mar 14 10:42:24 2021 user.notice QMI Connect: IPv6 Connection returned : "No effect"
Sun Mar 14 10:42:25 2021 user.notice QMI Connect: IPv6 status is "connected"
Sun Mar 14 10:42:25 2021 user.notice QMI Connect: IPv6 GET-CURRENT-SETTINGS is {"pdp-type":"ipv4-or-ipv6","ip-family":"ipv6","mtu":1430,"ipv4":{},"ipv6":{"ip":"2600:380:410f:a3f:b1c9:2551:5227:f341","ip-prefix-length":64,"gateway":"2600:380:410f:a3f:f8ee:4c4e:ff0:e826","gw-prefix-length":64,"dns1":"2600:300:2000:3486::13","dns2":"2600:300:2000:3486::14"},"domain-names":{}}
Sun Mar 14 10:42:25 2021 user.notice QMI Connect: Handle raw-ip
Sun Mar 14 10:42:25 2021 daemon.notice netifd: Interface 'wan1' is enabled
Sun Mar 14 10:42:25 2021 daemon.notice netifd: Network device 'wwan0' link is up
Sun Mar 14 10:42:25 2021 daemon.notice netifd: Interface 'wan1' has link connectivity
Sun Mar 14 10:42:25 2021 daemon.notice netifd: Interface 'wan1' is setting up now
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1' is now down
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1' is disabled
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1' is enabled
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1' is setting up now
Sun Mar 14 10:42:26 2021 daemon.notice netifd: wan1 (3755): udhcpc: started, v1.28.4
Sun Mar 14 10:42:26 2021 daemon.notice netifd: wan1 (3755): udhcpc: sending discover
Sun Mar 14 10:42:26 2021 daemon.notice netifd: wan1 (3755): udhcpc: sending select for 10.134.151.196
Sun Mar 14 10:42:26 2021 daemon.notice netifd: wan1 (3755): udhcpc: lease of 10.134.151.196 obtained, lease time 7200
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1_6' is enabled
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Network alias 'wwan0' link is up
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1_6' has link connectivity
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1_6' is setting up now
Sun Mar 14 10:42:26 2021 daemon.notice netifd: Interface 'wan1' is now up
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: reading /tmp/resolv.conf.auto
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain test
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain onion
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain localhost
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain local
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain invalid
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain bind
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using local addresses only for domain lan
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using nameserver 172.21.0.83#53
Sun Mar 14 10:42:26 2021 daemon.info dnsmasq[2691]: using nameserver 172.21.0.84#53
Sun Mar 14 10:42:27 2021 user.notice URL-DEBUG: hotplug (iface): action='ifup' interface='wan1'
Sun Mar 14 10:42:28 2021 daemon.info dnsmasq-dhcp[2691]: DHCPREQUEST(br-lan) 192.168.1.106 00:22:20:17:fc:82
Sun Mar 14 10:42:29 2021 user.notice firewall: Reloading firewall due to ifup of wan1 (wwan0)
Sun Mar 14 10:44:09 2021 daemon.notice netifd: Interface 'wan1_6' is now up
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: reading /tmp/resolv.conf.auto
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain test
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain onion
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain localhost
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain local
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain invalid
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain bind
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using local addresses only for domain lan
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using nameserver 2600:300:2000:3486::13#53
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using nameserver 2600:300:2000:3486::14#53
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using nameserver 172.21.0.83#53
Sun Mar 14 10:44:09 2021 daemon.info dnsmasq[2691]: using nameserver 172.21.0.84#53
Sun Mar 14 10:44:09 2021 user.notice URL-DEBUG: hotplug (iface): action='ifup' interface='wan1_6'
Sun Mar 14 10:44:10 2021 daemon.warn odhcpd[1408]: A default route is present but there is no public prefix on b
r-lan thus we don't announce a default route!
Sun Mar 14 10:44:11 2021 daemon.info dnsmasq[2691]: read /etc/hosts - 4 addresses
Sun Mar 14 10:44:11 2021 daemon.info dnsmasq[2691]: read /tmp/hosts/odhcpd - 0 addresses
Sun Mar 14 10:44:11 2021 daemon.info dnsmasq[2691]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Mar 14 10:44:11 2021 daemon.info dnsmasq-dhcp[2691]: read /etc/ethers - 0 addresses
Sun Mar 14 10:44:17 2021 user.notice Create Connection: Connected
Sun Mar 14 10:44:17 2021 user.notice Connection Monitor: Start Connection Monitor for Modem 1
Sun Mar 14 10:44:52 2021 daemon.err uhttpd[1867]: luci: accepted login on /admin/network/network for root from 1
92.168.1.105
Sun Mar 14 10:45:03 2021 authpriv.info dropbear[5321]: Child connection from 192.168.1.106:50300
Sun Mar 14 10:45:04 2021 authpriv.notice dropbear[5321]: Auth succeeded with blank password for 'root' from 192.
168.1.106:50300
 
What can I be missing? If anymore info is needed just ask. Any help would be greatly appreciated. Thanx for hearing me out.
Post Reply

Return to “General and Unclassified”