WG3526 ORIGINAL FIRMWARE

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
doo.john
Posts: 1
Joined: Tue Jul 30, 2019 2:23 am
Has thanked: 0
Been thanked: 0

WG3526 ORIGINAL FIRMWARE

Post by doo.john »

WG3526 ORIGINAL FIRMWARE from ZBT(come with my router).ANYONE CAN HELP ME HOW TO USE SSH AND SCP OR TELNET WITH THIS FIRMWARE?
-PASSWORD: admin without username annd you cant not use OPKG UPDATE OR INSTALL
Top
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:
Contact JimHelms

Re: WG3526 ORIGINAL FIRMWARE

Post by JimHelms »

My advice is to use the BOOTLOADER menu and install GoldenOrb.
Top
User avatar
Springer
Posts: 6
Joined: Tue Jul 23, 2019 8:39 am
Has thanked: 4 times
Been thanked: 0

Re: WG3526 ORIGINAL FIRMWARE

Post by Springer »

I was worried about flashing the goldenorb firmware into this router but all went super smooth with the tutorial Jim wrote.
Goldenorb is awesome firmware and is a substantial upgrade from openwrt.
I am a newbie and find goldenorb easy to use and there is loads of support for that firmware here at Wireless Joint.
-Springer :mrgreen:
Top
Post Reply

Return to “Firmware”