wg1608 + Foxconn T99W175

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Exmen
Posts: 4
Joined: Sun Mar 07, 2021 8:54 am
Has thanked: 0
Been thanked: 0

wg1608 + Foxconn T99W175

Post by Exmen »

did the wg1608 support Foxconn T99W175 5G m2 module (from hp laptop) ... i am asking befory making purchase
User avatar
Didneywhorl
Posts: 3635
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1369 times
Been thanked: 761 times
Contact:

Re: wg1608 + Foxconn T99W175

Post by Didneywhorl »

I think the T99 is a PCI modem, does it have USB mode capability?
Exmen
Posts: 4
Joined: Sun Mar 07, 2021 8:54 am
Has thanked: 0
Been thanked: 0

Re: wg1608 + Foxconn T99W175

Post by Exmen »

the seller said its only support pcie mode only
packlet
Posts: 51
Joined: Wed Sep 22, 2021 5:46 pm
Has thanked: 0
Been thanked: 6 times

Re: wg1608 + Foxconn T99W175

Post by packlet »

yet the hardware specs call out support for usb?...

http://219.143.15.28:3088/esurfing/tim/pim/20201105162420_100320126.pdf
User avatar
Didneywhorl
Posts: 3635
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1369 times
Been thanked: 761 times
Contact:

Re: wg1608 + Foxconn T99W175

Post by Didneywhorl »

It may support it hardware wise, but the firmware has to have it enabled. The Foxconn modems I know nothing about personally, but I have seen people messing with them in so many ways including enabling carrier aggregation combos and enabling and disabling 4x4 MIMO, etc.

We need a Foxconn firmware pro to chime in.
User avatar
Rich Hathaway
Posts: 609
Joined: Mon Mar 08, 2021 2:41 pm
Has thanked: 12 times
Been thanked: 210 times

Re: wg1608 + Foxconn T99W175

Post by Rich Hathaway »

That module has a qualcomm x55 chip, it supports usb, I dont have one to look at to help you enable it.
packlet
Posts: 51
Joined: Wed Sep 22, 2021 5:46 pm
Has thanked: 0
Been thanked: 6 times

Re: wg1608 + Foxconn T99W175

Post by packlet »

Hi Rich, any tips/pointers on how one might go about enabling USB mode on one of these suckers? there seems to be a plethora of the HP variants available on AliEx ~$75US, so if they could be made to work with USB (2 or 3,) might make for an economic hi-speed solution for use with Rooter... Thanx, Paul.
W0216420
Posts: 4
Joined: Sat Oct 17, 2020 7:18 pm
Has thanked: 0
Been thanked: 1 time

Re: wg1608 + Foxconn T99W175

Post by W0216420 »

I just ordered one of these modems (aka X55, aka L83053-005, aka T99W175.16) for my laptop, so I was researching whether it would be supported in Rooter for testing purposes. I hope to receive it this weekend.

I know with Quecte1 RM5x, the AT command to change between USB and PCI is AT+QCFG="data_interface",#,#.

<network> Integer type.
0 Set the network port communication via USB interface.
1 Set the network port communication via PCIe interface.
<diag> Integer type.
0 Set the diagnostic port communication via USB interface.

I will report back on my findings with compatibility.
eskaryo
Posts: 69
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 7 times

Re: wg1608 + Foxconn T99W175

Post by eskaryo »

The .16 says it's for Canada only per the documentation. Very interested what you are able to successfully connect to if you are US-based. I'd really like to be able to migrate to 5g and those modems have a nice price.

/edit: what that documentation means vs reality of that hardware I'm not sure but it's scared me off enough to avoid buying one until now
eskaryo
Posts: 69
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 7 times

Re: wg1608 + Foxconn T99W175

Post by eskaryo »

W0216420 wrote: Thu Sep 01, 2022 9:02 am I will report back on my findings with compatibility.
Any luck?
W0216420
Posts: 4
Joined: Sat Oct 17, 2020 7:18 pm
Has thanked: 0
Been thanked: 1 time

Re: wg1608 + Foxconn T99W175

Post by W0216420 »

eskaryo wrote: Wed Oct 19, 2022 10:35 am
W0216420 wrote: Thu Sep 01, 2022 9:02 am I will report back on my findings with compatibility.
Any luck?
The modem arrived DOA (or I killed it). It is unresponsive.
eskaryo
Posts: 69
Joined: Tue Aug 30, 2022 1:59 am
Has thanked: 5 times
Been thanked: 7 times

Re: wg1608 + Foxconn T99W175

Post by eskaryo »

W0216420 wrote: Thu Dec 29, 2022 12:30 pm
eskaryo wrote: Wed Oct 19, 2022 10:35 am
W0216420 wrote: Thu Sep 01, 2022 9:02 am I will report back on my findings with compatibility.
Any luck?
The modem arrived DOA (or I killed it). It is unresponsive.
I'll bet you it's the protocol. These only support PCIE/MHI wich the WG1608 doesn't do and is actually a little bit difficult to find an adapter to support converting the B Key to something more easily usable.
Post Reply

Return to “General and Unclassified”