Method to upload the good ".bin file" in the WE-826 on Linux Ubuntu with a RJ45 wire [ solve 30-05-2019 ]

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Nico_LTE
Posts: 25
Joined: Wed May 29, 2019 11:59 am
Location: Brest France
Has thanked: 0
Been thanked: 1 time
Contact:

Method to upload the good ".bin file" in the WE-826 on Linux Ubuntu with a RJ45 wire [ solve 30-05-2019 ]

Post by Nico_LTE »

FIRST STEP
Ethernet RJ45 specifications ipv4 in "edit connections"
IPV6 -> ignore

IPV4 :
IP: 192.168.1.5
Mask: 255.255.255.0
Gateway : 192.168.1.1

Connection mode : Manual
=============================================================================
SECOND STEP :
- Log the 192.68.1.1 router "welcome page"
- switch off the router or unpluged it
- Switch on the power and keep push the reset button at the bottom
- Check when the wifi and LAN leds are ligthtening, stop to push the reset button and refresh the 192.68.1.1 page
- Now normally you have a simple web interface to upload the new .bin file without restrictions
- wait the automatic reboot
=============================================================================
FILES DOWNLOADS LINKS :
Below the link for the flash generated with the .bin file for the system "the rooter project" dedicated to the ZBT-WE826(16M):
https://www.ofmodemsandmen.com/download ... -03-10.zip

https://openwrt.org/toh/zbt/we-826
downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7620/openwrt-18.06.2-ramips-mt7620-zbt-we826-16M-squashfs-sysupgrade.bin
=============================================================================
SOURCE : WINDOWS METHOD
https://wirelessjoint.com/viewtopic.php?f=12&t=5
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: Method to upload the good ".bin file" in the WE-826 on Linux Ubuntu with a RJ45 wire [ solve 30-05-2019 ]

Post by JimHelms »

You may want to move this topic to either the tutorial section, or the Router > WE\WG topic where it is easier to locate. Good write-up.
Post Reply

Return to “General and Unclassified”