I accidentally send the wrong AT command to the EM7565
(i sent at!usbcomp=1,1,1009 instead of at!usbcomp=1,3,1009)
After a the modem reboot it was no longer recognized by the router or windows
Is there a way to undo this change?
I do see still two COM Ports for the Sierra modem on the Windows Side (DM Port COM6 and NMEA Port COM7).
Any help is highly appreciated
Chris
EM7565 not showing in Windows or WE826-T2 Router
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
JimHelms
- Site Admin
- Posts: 1366
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 79 times
- Been thanked: 199 times
- Contact:
Re: EM7565 not showing in Windows or WE826-T2 Router
This can be a tough one. You may check out this TOPIC.muenchris wrote: Wed Apr 17, 2019 2:35 am I accidentally send the wrong AT command to the EM7565
(i sent at!usbcomp=1,1,1009 instead of at!usbcomp=1,3,1009)
After a the modem reboot it was no longer recognized by the router or windows
Is there a way to undo this change?
I do see still two COM Ports for the Sierra modem on the Windows Side (DM Port COM6 and NMEA Port COM7).
