worked fine but now nothing. Maybe I can plug ethernet and connect 192.168.1.1 but I figure wifi would be on If it's not bricked. Sorry for my bad englishWg3526 reset not working.
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
Killkillster1
- Posts: 1
- Joined: Sat Apr 13, 2019 8:31 am
- Has thanked: 0
- Been thanked: 0
Wg3526 reset not working.
So.. I set it up .. it worked!! Mc7455 with wg3526 newest fw 3.10.19. It didmt work well tried to reset router and now it has sys red light 3g4g green and power led red. I tried 30 30 30 technique a few times I'll try it again now but frustrated with this overly complicated fw/router worked fine but now nothing. Maybe I can plug ethernet and connect 192.168.1.1 but I figure wifi would be on If it's not bricked. Sorry for my bad english
worked fine but now nothing. Maybe I can plug ethernet and connect 192.168.1.1 but I figure wifi would be on If it's not bricked. Sorry for my bad english-
Jim Helms
- Site Admin
- Posts: 1369
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 80 times
- Been thanked: 201 times
Re: Wg3526 reset not working.
Use the boot load menu on the FIRMWARE RECOVERY mode and upload a new GoldenOrb image.
Also, make certain you use the firmware for the WG3526 and NOT the WE3926. They are not compatible with one another. This is a very common mistake.
Also, make certain you use the firmware for the WG3526 and NOT the WE3926. They are not compatible with one another. This is a very common mistake.
