USB3.0 To NGFF M.2 Key B Adapter Enclosure With SIM Card Slot
Hello and thanks to all for the support I've been able to read up on. I recently purchased the EM7565 and USB3.0 enclosure linked above. Great kit.
The kit contains all the screws needed, however the head, or cap to hold the modem to the board, is too small.
What size screw is this, or what is the fix/hack others are using to retain the board in place?
https://i0.wp.com/thewirelesshaven.com/wp-content ... ot-1-1.jpg
Modem Hold Down Screw - What Size?
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
FastEddy760
- Posts: 1
- Joined: Sat Jan 12, 2019 1:42 pm
- Has thanked: 0
- Been thanked: 0
-
JimHelms
- Site Admin
- Posts: 1366
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 79 times
- Been thanked: 199 times
- Contact:
Re: Modem Hold Down Screw - What Size?
Please reach out to us on the store and we will send a screw that replaces the one included in the initial set of the USB 3.0 to M.2 enclosures.
