Linksys Wrt3200acm with EM7565

Internet Speed Test Results, Links, and Discussions
Forum rules
Use the FORM MODE button to post
Post Reply
User avatar
Jflex113
Posts: 43
Joined: Thu Mar 15, 2018 2:13 am
Location: Central Michigan
Has thanked: 4 times
Been thanked: 9 times

Linksys Wrt3200acm with EM7565

Post by Jflex113 »

Edit: Just so everyone knows, this is with 2xCA there is no 3xCA being broadcast in my area.
Carrier:
Verizon
Distance_to_Tower:
3.1 to 4 Miles
Type_of_Device:
Linksys Wrt3200acm
Type_of_Modem:
Sierra Wireless EM7565
Firmware:
Custom ROOter on 4.9 Kernel
Antenna_Setup:
2 Wideband yagi's in a 90° MIMO configuration
Cable_Type:
5ft of LMR240
Speedtest_Photo_1:
Speedtest_Photo_2:
You do not have the required permissions to view the files attached to this post.
fjguyote
Posts: 11
Joined: Mon May 07, 2018 8:53 am
Has thanked: 0
Been thanked: 0

Re: Linksys Wrt3200acm with EM7565

Post by fjguyote »

Looks good. Any ideas on getting the EM7565 working well with the WG3526 LTE CAT6? Would your custom ROOTer translate well over to it?
User avatar
Jflex113
Posts: 43
Joined: Thu Mar 15, 2018 2:13 am
Location: Central Michigan
Has thanked: 4 times
Been thanked: 9 times

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 »

The Em7565 is m.2 not mPcie, so unless there is a version of tbe wg3526 that comes with m.2 there would be no way to set this modem up in that router. Another thing is the em7565 is cat 12 if you are just looking for cat 6 the mc7455 is perfect for that.
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms »

The EM7565 can only be used in the WG3526 by using a Mini PCI-E to M.2 adapter.
User avatar
Jflex113
Posts: 43
Joined: Thu Mar 15, 2018 2:13 am
Location: Central Michigan
Has thanked: 4 times
Been thanked: 9 times

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 »

Is there enough room to fit it all inside of that router?
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms »

Jflex113 wrote: Tue May 08, 2018 11:14 am Is there enough room to fit it all inside of that router?
There is. It is a little tricky to get the screws into place, and figure out which one should go where first, but it will work.
User avatar
Jflex113
Posts: 43
Joined: Thu Mar 15, 2018 2:13 am
Location: Central Michigan
Has thanked: 4 times
Been thanked: 9 times

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 »

Oh an I forgot to answer you question on would the custom ROOter work, yes it would it would just have to made for that router which can be done.
eodgator
Posts: 2
Joined: Wed Dec 26, 2018 7:16 pm
Has thanked: 0
Been thanked: 0

Re: Linksys Wrt3200acm with EM7565

Post by eodgator »

I'm planning on the same build, do you have any pointers?
eodgator
Posts: 2
Joined: Wed Dec 26, 2018 7:16 pm
Has thanked: 0
Been thanked: 0

Re: Linksys Wrt3200acm with EM7565

Post by eodgator »

I forgot to ask how did you connect the EM7565 to the router?
User avatar
JimHelms
Site Admin
Posts: 1362
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 194 times
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms »

eodgator wrote: Wed Dec 26, 2018 7:57 pm I forgot to ask how did you connect the EM7565 to the router?
You will need a USB2.0 or USB3.0 to M.2 External Enclosure
User avatar
Jflex113
Posts: 43
Joined: Thu Mar 15, 2018 2:13 am
Location: Central Michigan
Has thanked: 4 times
Been thanked: 9 times

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 »

I used a usb y cable to micro usb to connect to a m.2 usb 2.0 enclosure and ran rooter firmware on the wrt3200acm and that works well
Post Reply

Return to “Speed Tests”