Is there a WiFix specific load balancing tutorial on the site?

[mezmerizz0454]

i found some info here
https://wirelessjoint.com/viewtopic.php?f=32&t=956&start=50
which is great

Code: Select all

Router1: WE1326/Sierra EM7565/ATT Tablet plan
Router2: WE826-T2/USB Note5 phone/ATT prepaid plan
Loadbalance: "wan" interface = internal sierra | "wan1" interface = ethernet cable from Router1 to Router2 WAN port.

That is just how I have it setup currently. You could just as easily use only 1 router and have the usb phone plugged in directly to "Router1" in the above setup to it's usb port.

fyi, if you end up using load balancing dont forget to enable Modem/Connection Profile/Advanced/..."Enable Load Balancing at Connection=yes" to make it persistent across reboots. Took me forever to track that down.

but i was wondering if there is a full blown walk through for WiFix firmware specifically load balancing setup i missed?
Ill tip anyone who has it ready to go $20

[BillA]

You may want to take a look at MWAN load balancing "full blown" guide;-)
https://openwrt.org/docs/guide-user/net ... iwan/mwan3

Or better yet, true channel bonding/load balancing OpenMPTCProuter.
https://wirelessjoint.com/viewtopic.php?f=21&t=1078