Wireless Joint

Here's another post I did earlier this year on the ROOter forum, which is now a bit difficult to find. I did this post in late January, and I've since moved from the Raspberry Pi 4B to a Qotom x86 (i3) industrial PC with 4x gigabit Ethernet ports, 2x USB3 and 2x USB2 ports. OpenMPTCProuter needs an ...

There may be nothing wrong with the sim card or the slot, make sure your modem is being recognized by the router.
Go to Modem > Modem > Network Status and check the modem ID / Modem IMEI
If it's not populated then there's a modem issue which you must solve first before being able to see the sim card ...

mezmerizz0454 wrote: Sat Jun 06, 2020 6:38 pm I just got a NEXQ6GO and installed a EM12-G Modem but my sim slot wont see the sim info.

What Mini PCI-E to M.2 adapter are you using?

Well i may have found the string i needed but would like confirmation so i don't do something crazy and brick my modem for Sierra modems it seems to be this

AT!SELRAT=06

would this be correct for LTE only bands?



You can check the currently active bands via:
AT!BAND=?

00 - All bands
01 ...

Try:

Whats worked lately with visible(verizon) and ATT is:
-Program the correct APN into the connection profile manager
-Remove all of the AT+CGDCONT entries, including AT+CGDCONT=1, via AT-Terminal window.
-Power cycle the router

Router will come up, program the correct APN and eventually connect ...

You are correct when you switch SIM or when Quectel modem detects a different sim that it recognizes. It will switch to that carrier's MBN file (in this case it's Verizon) which gives you all the APNs that you see when doing AT+CGDCONT? When it doesn't recognize the SIM, it will switch to the ...