Wireless Joint

Yes sorry!! It's a Banana Pi R3 not R4

I have 2, Mimo Panel Antennas for sale and 2 LMR200 dual antenna cables for sale. Used for a 4x4 MIMO setup on the roof, and worked great! Used by in perfect working condition.

These are the antennas:
https://thewirelesshaven.com/shop/antennas/outdoor/outdoor-cellular/mimo-directional-panel/high ...

BananaPi R3 purchased from Amazon with kit. Rooter flashed to memory so ready to go. Includes EM7565 and whole setup works great. Have tested on ATT, Verizon and Visible. Power cord and antennas included.

$160

Screenshot 2024-01-24 at 12.12.13 PM.png

$50

Used, no modem included. Will come with power cable and antennas.

Selling a sweet 4G/5G setup. Ready to go just needs sim card. Have used with ATT, Verizon and Visible with great results. I was using external antennas but can include the small individual antennas with the usb enclosure. Power cords and sata cable included as well.

Everything - $250

Or ...

Some have added exhaust fans to the enclosures, but me I’d leave it sealed to keep moisture out. It should be fine.

So another update. In testing ATT has worked flawlessly. Literally put in sim card and plug it in. All the auto settings work great. Verizon has been a complete nightmare thus far though. I was able to get it working with some weird procedure of changing settings and restarting. But it does use ...

AlteredLogic It will definitely work in an outside enclosure, and probably cool better since it has the fan. It has a similar footprint to the smaller NEXGO router, but is thicker. I still think it'll fit just fine, and it actually includes four ~4" jumpers to connect to a 4x4 antenna. I do wish ...

I thought I saw a video from Alfredo Caceres over on one of the FB group pages showing the ttl mode that device?

Sorry I don't have FB, anyway to share the video or PM me?

I wouldn't feel comfortable sharing someone else's video on a forum that they haven't posted it on. I can ask him ...

Just got my 2 units and have started playing around. There is a lot of configuration you can do; tower and band lock, searches, status etc. wondering what it does with ttl? Is it just always hotspot data, cause there is no way to change it.

I thought I saw a video from Alfredo Caceres over on ...

Just got my 2 units and have started playing around. There is a lot of configuration you can do; tower and band lock, searches, status etc. wondering what it does with ttl? Is it just always hotspot data, cause there is no way to change it.

Glad to help, I've tried more modems/routers/antennas then i care to admit... The 7565 has be the most issue free over the years. Not the fastest, but very reliable. 2nd would be the Quectel 502 I have in an external USB enclosure, I've had zero issues with it as well and it runs a bit faster in ...

+1 to comments above. I've not been involved in the testing/dev but have know about it for a while and have been anxiously waiting for it. I have 2 on their way here now. My biggest benefit will be a single device powered over POE in an enclosure on the roof. Saves money in bypassing the router ...

Update,

Getting some weird happenings with the Banana Pi. So testing with external usb enclosure worked, Sierra 7565 worked fine internally in the mini pcie slot, but my Telit lm960A18 seems to throw a fit. Says that no sim pin is set in the profile. Never seen that before.

Tell works fine with ...

WRT32X is still a beast, best I've used honestly. But they are getting harder to find and more expensive. If you can get them for around $150 I think they are the better option, but not for any enclosure, too big and heavy.

Is the wifi6 working?

Can confirm wifi6 does work

Nice! How is the throughput performance from modem to wifi? I have mine coming in today.

For a standalone router it seems pretty solid. My current setup is:

Quectel 502 in USB3.0 Encl > WRT32X running ROOter > Edgerouter4 > Unifi ...

Didneywhorl wrote: Tue Jan 10, 2023 8:52 am Is the wifi6 working?

Can confirm wifi6 does work

Sorry last update :)

Found great documentation on OpenWRT on how to do this. If you follow this guide, only using the ROOter firmware linked above it works perfect and I was able to get it flashed over the EMMC and have it working well.

Am going to test this out against my current USB3.0 Enclosure ...

Update....

I see my usb stick in ROOter, looks like it mounts automatically, but when I try to execute

dd if=BananaPi-BPi-R3-GO2023-01-05-ext4.img of=/dev/mtdblock0

it says 'no such file or directory'

And I'm assuming using the ROOter firmware flash will only flash it to the sd, not NAND/EMMC ...

I found the firmware, just wasn't looking correctly I guess :)

I am pretty new to this sort of configuration process though, is anyone aware of a video or maybe layout the process a bit more detailed on how to go from SD Card to Nand to emmc for Rooter setup?

https://wiki.banana-pi.org/Getting ...

Looks like a good price on a knockoff Protecli mini-pc. Not sure the mini pci-e will do usb 3.0 though, i think it's limited to usb 2.0 speeds, but i could be mistaken. I have my 502 in one of Wireless Haven's USB 3.0 enclosures going into a WRT32X with great success. I don't have 5G here, but have ...

Do you have a link to the Rooter Build you got from Dairyman? Was wanting to go the Orange Pi 5 route, but don't see a build for it yet.

Thanks! I was able to ssh into router, and run those 2 commands successfully, but i don't have 'modemmanager' as an option on wwan. Is there anything else i need to do?

Screen Shot 2022-08-23 at 1.44.07 PM.png

Hey,

Anyone have a write up on how to install Modem Manager? I purchased a GLi.Net AXT-1800 router and need to get MM installed to get my USB enclosure recognized. I found the thread on the 826 but that was from a defined firmware install. How do you install it onto the router manually? Thanks in ...

Hey,

Just flashed my gl router to rooter but have no wifi option. Anyone else seen this? Says it's supports for wifi on rooter site but no luck

Has anyone had luck using OMR with 2 verizon sims? Seems like i read that Verizion didn't allow it somehow and people had to user ATT or TMobile as the 2nd/3rd etc connection. We do have good ATT signal here but i don't have any account with them and not sure what is available these days for an ...

Did you get your PiHat? I've been thinking of pre-ordering the 5G hat, but don't really need all the extra stuff it comes with just the hat.

Thanks! That is what I figured, I've used the EM7455 and EM7565 pretty extensively with few issues. The Telit has been great too, but I've struggled more with the AT Commands for it and understanding how to configure it. Guess I'll give the 9191 a go... wish me luck.

Thanks again!

Hey all,

I am about the pull the trigger on test out the new EM9191 in an USB enclosure (wireless haven) with a Raspberry Pi4 B running latest GO. Wondering if anyone has had an luck/experience with this setup or similar so far? Or just the 9191 in general. I'm using a Telit 960 right now so even ...

So talked to the company and appears it should work with whatever modem i want via pcie, then ethernet to my edgerouter 4 (although i'll need to figure out how to set ttl on it).

Hey,

Wondering if anyone has experience with the protectli external modem enclosure? Looks similar to the WirelessHaven usb enclosure only with ethernet interface. I would want 4x4 mimo modem so would need modifying the case a bit, but other than that might work for my use case. I currently use an ...

Thanks @tetranz but no go, didn't seem to affect anything.

Hey, helping a friend out with some setup and I'm having issues with their Page Plus sim. I moved them from an old Version LTE router, to a WG3536 with an LM960 modem. For some reason it will never connect. APN - vzwinternet. Any ideas? My VZW sim works no problem when swapped in.

Thanks!

Hey,

I've reset my NEXQ6GO-M and cannot log into the router now. I've tried blank, admin, and Rooter2017 - Rooter2022 with no luck. Any ideas?

Thanks!

Any way to check a log to see why it dropped?

Hey,

Getting a weird occurrence with my LM960 modem. When using Microsoft Teams with incoming video, when there are around 5+ people with video my internet completely crashes and i have to physically unplug my router (WG3526) so the modem can reestablish a connection. Only happens with Teams, not ...

Hey,

Having a weird issues the last few weeks. When I'm on a MS Teams call and people are sharing their video, occasionally i completely lose connection on my Telit 960 modem, and have to physically unplug the router (WG3526) to get it to reconnect. It doesn't always do it, but I would say it does ...

Under Modem > Network Status I can see it use CA, usually B66 20mhz, B2 10mhz, B66 5mhz. But under Modem > Misc I don't have a UI option to bandlock (says bandlock not implemented for this modem). I'm on firmware version 2021-02-20 on a WG3526. Not sure if newer versions have this for a LM960 or not ...

I've been wondering the same. Mine tends to lock on B66 most of the time on Verizon, but will sometimes want to revert to B13 or B4 with much slower speeds. Wondering if there is a way to set CA to user B66 and B2 for example like I could with my 7565.

Hey,

Does anyone know what the orientation of 4 yagi antennas for 4x4 mimo should look like? And what separation of the antennas should be approximately?

Thanks,

Zac

Thanks, i've implemented your suggestion and will see how that works out going forward. Just got my LM960A18 in today with some new antennas/cables. Excited to see what the new modem and 4x4 mimo might yield.

Hey,
I’m planning on giving my current modem EM7565 to a family member and looking to upgrade to 4x4 Mimo.

Looking for suggestions and experience with Verizon iPad sim on the following modems.

LM960A18
EM160R-GL

There are some other 5g modems available, but doubt we get 5g service here anytime ...

Hello,
Sounds like you made some good improvements. Just wanted to say to be careful of attic heat. Last winter moved mine to attic and it worked great. Then when summer hit started to over heat up there in the attic. The attic itself was getting up to 130 to 140 degrees.

Yeah that's what I was ...

Is it normal for RSSI and RSRP to be so far off?

at!gstatus?
!GSTATUS:
Current Time: 3981686 Temperature: 46
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B66 LTE bw: 20 MHz
LTE Rx chan: 0 LTE Tx chan: 132172
LTE SSC1 state:INACTIVE LTE SSC1 band: B2
LTE SSC1 bw ...

Also, I was able to get the modem to lock on B66 (20mhz) / B2 (15mhz) / B66 (mhz) finally using the excel spreadsheet and I am not getting on average around 75/25 for down/upload speeds. In the mornings the download is closer to 100mb down. Really happy with these speeds and will probably leave ...

I added a $20/mo unlimited tablet line.

Not sure if this is possible... but my best bands are B2, B13, and B66. B2 gets great speeds be only gets picked up if I bandlock to it specifically. B66 gives me 2 in CA, one at 20mhz and 5mhz (i think there is a tower a few miles back from the good B66 tower). Can i limit to only the good B66 band ...

Hey all,

Just wanted to share some insight into the last week of work on my new setup. Purchased a EM7565 and WG1608 from The Wireless Haven in hopes of setting up on Verizon unlimited plan and replacing my Mofi4500v4 router. Was hoping to get a little better speeds on the new router (both modem ...

Good Evening, Firstly I want to thank everyone for all your help with my quest to get good internet speeds.

I have upgraded the modem in the WG3526 to a Sierra 7565. Thank you for all the tips and tricks to get it successfully installed.

My issue is I am only able to pull speeds of about 13Mbps ...

First. The EM20 is a product no longer made. You'll have to get a rare new one or find a used one. The EM160 is soon to release and all the latest "5G" modems are 4x4 MIMO. That or the Telit LM960A18, Sierra 7690, and some of the SIMCOM and Fibocom modems are 4x4 MIMO. I only have experience so ...

Verizon and my best luck is locking on B2, but I receive several bands. See screen shot. The MOFI is super finicky with CA... B2 is my strongest band, but B13 and B4 are also pretty good. B4 will often go to 20mhz I can get even better speeds, but it'll jump between 5 and 20mhz all the time making ...

Hey,

Looking to upgrade my stock MOFI4500 to a custom setup. I'm considering the EM20 and EM7565 for this purpose but not sure the best route to take.

Currently I have:

2 yagi's > 40' of RG6 cable > 2x Wilson IoT boosters > Mofi4500 > Edgerouter4 > rest of my network.

Getting around 40-50 down ...

Hey,

Looking to upgrade my system to improve my LTE speeds. I currently have a MOFI4500 with EM7455 which works pretty good (40-50up/15-20 down). I have 2 yagi antennas on the roof that run into 2 Wilson M2M Iot boosters, then into the MOFI in the basement. Antenna to booster is around 40' of RG6 ...

Search found 53 matches