Wireless Joint

Great idea for those that leave their setups alone and not redo / reinstall / reflash / reset things every other day lol. But yes, if I ever get to the point I can leave things alone it would be a great way to track it!

I have a WG3526 with an installed EM7565 for sale. I bought it new August of '20 and used it for about 8 months this year running a Cricket Data plan. It was working good up until I changed to a Netgear M1 this last weekend. I am willing to let it go for $100 which would include mailing. I tested ...

This item is sold to mtl26637. Thread can be closed.

Hi Yes, I think you're missing CleanBrowsing - cleanbrowsing.org </a>. CleanBrowsing is a DNS-based content filtering service as well. Key difference is places special emphasis on helping parents and schools with kids. They place special focus on malicious, pornographic and obscene content. Tony

from a different thread but they had simular issues
Have you tried resetting the modem?

Should be AT+QPRTPARA=3 then after it reboots AT+QPRTPARA=1

Thank you. That seems to have resolved it.

I was only using AT+QPRTPARA=3 previously. Never followed it with AT+QPRTPARA=1

Thanks again. I really appreciate the help. Was driving me nuts

I really don't know what I did but it is SO much better. Took all this crap to work, along with my laptop. Signal strength is 95 to 100 percent there. Tried to get to Chinese letters with no luck. The Wireless Haven says no Chinese stuff on the newer routers. Never was able to flash firmware but I ...

Didneywhorl wrote: ↑Thu Oct 14, 2021 10:41 am Ill look through your logs when I get a min to sit down at my pc.

thank you!

Another update in case this is useful for anyone. I'm still messing around trying to get the perfect startup script. It's a frustratingly simple but somewhat tricky to solve problem. The script I published at https://wirelessjoint.com/viewtopic.php?f=8&t=274&start=50#p22004 has been working well but ...

So I managed to solve the issue. I needed to flash Verizon firmware rather than generic firmware.

Hello everyone.

Thank you so much for all of your answer. I did a soft reset from the firmware and it for some reason worked out of the box. I'll try to use your setting to see if there's an increasing in speed.

Thank you all

Lowering the price to 150 shipped.

gscheb wrote: ↑Fri Oct 22, 2021 7:03 am Turn custom TTL setting off. When you use the custom rules then you don't use custom ttl at all. Try that and see if that changes anything.

That was it. Thank you!

Turn custom TTL setting off. When you use the custom rules then you don't use custom ttl at all. Try that and see if that changes anything.

After an extended phone conversation with AT&T somewhere in this world and testing what she could, she decided that there was something wrong with my Sim card and also some setting on this router that she couldn't diagnose. So After getting a replacement Sim from AT&T yesterday, I went ahead and put ...

Let us know if U still have for sale-thanks, interested

Issue from official forum:

Code: Select all

// Change mimo switch mode:
// 0 - by AT command
// 1 - by state of PIN68

AT+QCFG="lte4x4mimo/disable",0

// Change mimo mode:
// 0 - MIMO 4x4 mode
// 1 - MIMO 2x2 mode

AT+QCFG="lte4x4mimo/disable",1

This device is challenging to say the least, I have made some good progress on it, below are some screenshots with address's and a couple videos showing some of the progress. Is anyone else working on this device? Post your findings if you are. *Full Custom firmware *Enable all ports- DIAGNOSTIC ...

So I decided to go with the single antenna with 2 Mimo connections built on it. But i did have an installation question. The cell tower is less than a 1/2 mile away in heavy woods. Would i see much of a difference in speed if I mounted the unit in an attic or outside? The height will be about equal ...

I may try that some time. Right now I am too scared to change or do anything. It's working well.

I will give that a try sometime.
Thanks

Very happy with AT&T so far. Even at peak hours 35-50Dn and 15-20Up CSQ 24-29 SINR 8-16 Stays on a tower that is probably not in heavy use.
Visible was great early AM but peak sucked.
Thanks to you guys for getting me going.

I don't plan on trying this, was just curious how it would work. Sounds like a bad idea.
Thanks!

Well the T-Mobile way with phone sim is against terms of service but it isn't illegal. Used this at three houses on differnt setups running for couple years no issues. I used a terabyte or more per month on mine. If you want something legit for a year consider Calyx institute. https://calyxinstitute ...

Ok thanks once again for the help! What would be the difference in choosing the cat12 vs the cat16?

Hello All, Not really looking to hack much here (maybe), but ya'll helped me a ton in the past getting my Nighthawk set up on the iPad Unlimited plan at home ( going on two years now with using 1-2 TB a month :D ) I figured I'd ask here. The company I work for is moving and local, hardwired internet ...

Thanks!

Tried nothing, so here's the scope after looking into it and hours of frustration with tmobile.

I some how got onto a secondary 100gb plan that is locked for only the inseego device.

asked for test firmware, thanx
https://forums.whirlpool.net.au/thread/3vx1k1r3?p=1133

Delete your cache, that may help.

I was lucky enough to get in the Starlink beta earlier this year, and have not used any of this equipment for quite some time. Most of it I never used at all. Hoping to sell it along to someone in need of it. WE826-T2 with Sierra EM7565 with 2 power supplies. $100 +shipping itelite PRABOXe enclosure ...

what sort of antenna(s) connected to your modem, and did they get moved or re-oriented (maybe by strong wind, etc...) how far from tower are you? did someone park a truck in your line of sight in that direction? etc... If nothing changed at your end, could be something changed at the tower to cause ...

ok, found the issue. I kept trying to connect via the DM port, not realizing there was another item in device manager for the WWAN (listed under "Modem" and not "Ports"). Duh. After connecting to com6 (wwan) instead of com1 (DM port), it worked. But I had to use ATE1 to get it to echo commands ...

Been reports that you have to sign up on waiting list and nag them.

2 months out - setup seems to work with TTL=120 & GhostVPN. 1st month was at 15GB before starting using ttl/router - got Verizon 15GB warning. Data was rate limited to 600kB/sec. 2nd month got no warning - data kept going at rate limited by signal strength & vpn forwarding. No indication from data ...

#start TTL rules
iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 64
iptables -t mangle -I PREROUTING -i usb0 -j TTL --ttl-set 64
ip6tables -t mangle -A POSTROUTING -o usb0 -j HL --hl-set 64
ip6tables -t mangle -I PREROUTING -i usb0 -j HL --hl-set 64
#end TTL rules

Didneywhorl wrote: ↑Mon Nov 01, 2021 11:51 am Sounds like good ole ATT at it again. Not uncommon of an issue in the last few years. Annoying. Verizon has done it too. I've not heard of tmo/Sprint doing it though.

Even that is still better than putting up with Hughesnet continuous 700-900 latency.

Thanks Didneywhorl

Yeah, I haven't solved it but it doesn't really matter. Probably unrelated but just an interesting thing I noticed. I'm into my third week on Page Plus and the first week or so the modem network status showed Provider as HOME, then it was VERIZON for a week or so and now I just noticed it's back to ...

ep06-a the connectors are larger and you wont need a pcie adaptor.

+1 as well for quectel being easier to work with

Voxel firmware V9.2.5.2.26SF has been released. Mostly package updates with some fixes as well. OP updated with download and release notes links. Also, the successor to the LBR20 with WiFi 6 (though not the newer 6e standard) and 5G is now being sold by Netgear: https://www.netgear.com/home/wifi ...

Didneywhorl wrote: ↑Tue Nov 02, 2021 5:58 pm No clue honestly. I may have some laying around though. email thewirelesshaven and I'll get one sent to you.

Thanks, I will try to find one here first and if nothing really works will ask you for help later.

Whenever I swap sims with the same provider it takes a few reboots for the number to register. TTL settings has never stropped the number from registering for me, just whether or not I could get data. If I am moving from 1 provider to another I note my few settings i use on the mofi, put in the new ...

nevermind. answered here: https://wirelessjoint.com/viewtopic.php?t=2180

I had this happen a few weeks ago. After contacting simple mobile. They came back to let me know they updated the terms of service that the 'unlimited' plan throttles at 250gb now. Not sure how true it is since some of these reps will throw anything at you to close the call. So take it all with a ...

Device : ZBT-WE1326 (256M) Model : WiFiX WE1326v5 Firmware Version : GoldenOrb_2021-01-21 Status : TTL @ 65 Network> Firewall> Custom Rules> #startTTL iptables -t mangle -I POSTROUTING -o wwan0 -j TTL --ttl-set 65 iptables -t mangle -I PREROUTING -i wwan0 -j TTL --ttl-set 65 #endTTL ISSUE : When I ...

Great reply - thank you !!

You cannot touch the device in-between the time you query the challenge and the time you input the response or it will fail every time, so after you send the openlock query do not send another at cmd or do not unplug the device or repower it or touch the cli screen you are using or query will change ...

Hi everyone, I have recently configured a mobile internet setup using a USB-tethered Visible Wireless cellphone hotspot, a travel router, and TTL mangling to get unlimited, unthrottled internet in my apartment. Having used it for approximately a month now, I wanted to post my solution to get this ...

Quad Bonded 5G modems with all major carrier SIMs and mmWave support. Gigabit ethernet, no wifi. Directional antennas that can be articulated via remote and signal scan software. Oh you meant a real existing setup? ;) Nope, I literally wanted your ideal overkill fantasy setup. (but with real world ...

ZTE....it's basically the companion to the Nighthawk M1 that was sold to Bell/Rogers (Canadian carriers).
It uses the Qualcomm MDM9250 chipset

Just reading over this thread again I told you wrong, I did not realize you were using a live cd and not working with a full python library installed. So what you should do is run the help command and see if it returns the help info so you can know that you are calling it up correctly and it is ...

Thanks Rich I appreciate it. I got that part figured out so I can now mess with band locking. Is it possible to change TTL on the MR5100 itself? I know I can plug a openwrt router into it but I'd prefer just connecting it to the hotspot directly.

So after this experience changed phone service. Actually personal phone for son and I to something different. Hoping in future things would get better again. When first got on visible it was great. Now Hear my father is having issues with his phone. Need to change his now too. Don't get me wrong ...

Didneywhorl wrote: ↑Fri Nov 12, 2021 2:49 pm I've heard that modemmanager is pretty dang good in vanilla openWRT. I need to spend more time with it and its mmcli tools.

You got it, that's exactly what I used. Added the modemmanager package and added a new interface which let me attach the Quectel directly as the device and boom, all good.

Ty for your help Didney, I really appreciate it. Finally had time today to get up on the roof and get it all situated,. I wasnt able to put them exactly side by side on the pole but I have 1 slightly lower than its partner, one tilted 45 to the right and the other 45 to the left, with the second set ...

Hello guys,

just some info for people who might need the SIM card try for WG1608 - looks like this is Molex 91236-0001

Looks like someone has done something like that https://forum.gl-inet.com/t/quectel-ec25-e-firmware-upgrade-on-mifi/16491/7 That is interesting, thanks. I looked at it a couple of days ago and indeed extroot is needed because ROOter (I installed the "full" image with load balancing on board and ...

If you want good advice you need to give more detail. Those of us willing to help can not see what your setup is. Working with these things require being methodical. From the little information you provide all I can glean is your TS-9 connectors are no good. They should not just fall out. In my M1 ...

Thanks. That worked. I just made a backup and edited my existing file. Streaming is fast now regardless of stream saver.

Well, none of this worked so the A7 went into the trash. Bought another A7 to try this again.

What modem firmware are you using again? I've heard the earlier versions don't work with this command, but I tried with A05 and it isnt working. I wonder if it is dependent on certain parameters. hmmmm...... <squirrelWheels> I think I figured out what is the problem (I use EM160RGLAUR02A05M4G). You ...

Good point. I didn't think of that. Matter of fact there are A LOT of settings in Quectel modems that are handled in this way. You must first 'enable' the ability to change a setting to be able to actually change the setting. IMO, the most important command for checking signal strength/integrity ...

The Wireless Haven contacted me and helped resolve the issue. Great support from those folks. The solution ended up requiring me to execute= the AT+QMBNCFG="Deactivate" command. Not exactly sure why the first 4 systems I built didn't need it though.

https://thewirelesshaven.com/shop/mini-pcie-m2-adapters/modem-enclosure/usb3-0-to-ngff-m-2-key-b-4g-5g-modem-adapter-enclosure-with-sim-card-slot-new-style/ That would be my choice as well. Your modem requires more power comparing to the older CAT4 - CAT6 modems and having a separate power adapter ...

das1996 wrote: ↑Thu Nov 18, 2021 7:15 pm @hazarjast How do i send you a private message?

Best to reach out via email: hazarjast at protonmail dot com

oh, sorry. :) APN - fast.t-mobile.com TTL for IPV4 AND HL for IPV6 of 65 usually works. Turn off the modem APN autoload feature: AT+QMBNCFG="AutoSel",0 and AT+QMBNCFG="Deactivate" Usually all I do. May also want to make sure the SIM detect is right and it reads your SIM card ICCID number. Did all ...

I think it's finally time to tell Hughesnet to take a hike!!!!!!

go_navy wrote: ↑Wed Nov 03, 2021 4:04 pm I wish I could PM you about the IMEI for LBR20 but the system won't let me. Can you send me a PM so that I can seek help from you? Thanks!

I don't believe PMs are enabled on this site. Feel free to reach out via email: hazarjast at protonmail dot com.

My three set ups never went in the tablet. Was directly put into router device.

I believe OMR does support direct connections, however, I'm not sure if it can handle multiple as i've never tried. Also the OMR box is already extremely busy with everything else so I'd recommend keeping the modems separate. It all depends on how fast you want your setup to go really. LTE equipment ...

going from memory i think i used the router reboot option, may have been modem reset, try modem reset first as it takes less time for the router to recover. I used the google DNS server as the tracking ip 8.8.8.8 I would set ping count to 3 or change interface down to 1 and i think i set ping ...

This may sound stupid, but if you need to move the antennas 10 feet farther away from the router is it possible to relocate the router 10 feet closer to the new antenna placement? Maybe put it in an attic? Move the router to an externally closer spot? I had an issue like yours and ended up cheating ...

If it aint broke dont fix it

I am having same problem (see my posting under "Router Devices - Routers" with title MOFI-PagePlus Decreased Mbps). Will keep you informed if I find out anything. Good luck.

Search found more than 1368 matches