Wireless Joint

Yes. I just purchased a new cat6 straight cable so the cable itself should be good.

Just received an email back from support and they’re sending me a another injector. So we’ll see if that’s the issue. Thx

On mine it is called operation mode

Operation Mode.PNG

Ethernet from the LAN on the NEXR5GO router to WAN on the tp link router. Typically the WAN on the tp link will be different color. After that just log into the tp link and set it up. There should be different modes in there to set it up a access point. Now it will work with out the setting up as ...

Update: New sim fixed the issue. So it looks like AT&T was blocking the connection.

I have fixed the issue now it would seem. i swapped in my em160r-gl which is LTE only and everything works great now. It would seem that something T-Mobile is doing on the backend for their 5G network is messing with stuff.

After connecting the routers, how do I log in to the TPLink?
Never mind. I was typing the wrong address. I will have to test this weekend.

Those commands did it, after I reflashed the firmware. It is now connected to V*sb1e, shows the right SIM and Modem also. Can't get on the Internet yet, but still working on it. Thanks to those MMIB AT commands Didneywhorl gave me and the proper firmware, these steps did it I believe.

Those guys drive me nuts. What someone can read in 2 minutes they take 13 to explain. But the youtubers don't get paid with less than 10 minutes of content so we are doomed for life to have to listen to the whole thing .... oh well.... could be worse.

Devices have a pre-determined timeout for specific runtime environments, so whether its written in your module or the containing device has it one of them does and you can adjust it on most platforms, below I just took from 8800L hotspot but will be similar in your software as well. timeouts.PNG ...

Had this project stored away for a long time. It seems there was a problem with the USB enclosure/adapter I had the LM960 in as it got where it would rarely be detected by my WE826, and also very unreliably when plugged into my windows laptop. I finally installed the module directly in the WE826 ...

I don't think you will have much luck with typical "IT" PC store. They may know of the networking side of things but i'm sure at this point you would know more about the "LTE" side of it unless they have experience already. At this point it could be several things such as comms (mbim vs. qmi, etc ...

Thanks for the info!

I don't know when this regression was introduced, but all hotspot features of Android 10.3.12 seem to rewrite the TTL of packets so you are out of luck tethering with the phone. You need to use an app which tunnels data between computer and the phone using android usb debugging, and I found the most ...

Antennas are the most important investment. Most routers are absolute garbage so I rolled my own "router" by hooking up my LTE USB modem to my PC which runs Linux and KDE. KDE networkmanager has a built-in internet connection sharing feature which distributes my internet connections wifi (in AP mode ...

I have both this plan and the hotspot. For some reason it doesn’t get the same signal as my Tmobile iPhone 11 Pro Max. Not even looking for 5G honestly, but I expected the same level of service as my phone. Apple pays top dollar for top of the line Qualcomm modems. You won't get any modem as good a ...

Thanks so much for responding! It's odd, I tried running AT+QPRTPARA=1 and it seems to have caused some of the settings to take the reset but not all. For example, the mode_pref is now back to 'AUTO' but the Band is still set to 5. I also tried AT&F0 after the AT&F command, it returned 'OK' but ...

tetranz wrote: ↑Wed Sep 15, 2021 11:13 pmI haven't managed to get WireGuard working yet.

It was just DNS. When I run WireGuard it doesn't seem to be able to use the default DNS. I set custom DNS to 1.1.1.1 in the LAN interface and WireGuard is working great. This is very cool.

I wouldn't say 35+% increase in gain is real similar ( 11 dBi x 1.3636 = ~15 dBi ), but I get what you mean. It's not astronomical. For about $20 more (Not including shipping charges, The Wireless Haven is free shipping over $100) and to give up 35% increase in gain, your saying the aesthetics ...

If you build this task, how do you know what to set the TTL to? Is there really a reliable pattern like "after one hour set it to 66, next hour 67 etc? I thought it was kind of random. Maybe you were going to try a selection of them and pick the best speed. That sounds challenging to say the least ...

Nothing at all in between the camera and my house. I have everything ready to install and try the antenna this evening. Thanks.

Below is an edit to the original instructions per some changes from Didneywhorl's post This should work for Quectel Modems EC25-AF, EP06 and EM12 Before you start this might want to set back to OEM state if you been putting other commands in to start off fresh. - Set modem to its OEM state Command ...

Got it to work, just follow the advice here:

https://wirelessjoint.com/viewtopic.php?f=32&t=1703#p11634

UPDATE: Put adapter and MC7445 into a linux machine. Ran dmseg and the adapter and MC7445 was found. Red led turned on (previously had not). Removed usb adapter and put back in the Windows 10 machine. Windows found and loaded drivers. Was able to reflash (twice) the generic Sierra firmware. Perhaps ...

It’s my understanding the prepaid plans or for people with poor credit ratings. Or for people that do not trust the carriers with there credit card due to they sometimes hit with a high bill. The other reason for going prepaid is if you don't need continuous month after month use. I just setup a W ...

Selling my Quectel EM20 installed in a WG3526P bought from The Wireless Haven. Will come with upgrade 3A power supply and everything that you get when buying a WG3526P. Looking for $420 which includes shipping. Method of payment will be PayPal or Venmo. The WG3526p is in great condition had it for 2 ...

installed latest version of WiFix-NEXP1Go. Internet came back. No understanding of why, but so far so good.

I would go back to a full factory reset... where you get the chinese load screen and try to load the firmware clean. If you get the same results I would go back a version and see if the problem still exists. There is a previous version posted in the same area from feb 2021 There is also a version ...

The Wilson directional antenna was only marginably better, but did show a little improvement. The problem is getting bluetooth to connect. After getting a connection, the Wifi works OK. Got an antenna coming from The Wireless Haven on the way to try.

Also reset the router to default parameters with no change. Then I was going to change sim card and update device on at&t with new sim card but at&t said they could not update because this was a 3G divice. I did get the divice working by creating a new account with a new imei and new sim card. So it ...

@Didneywhorl, Thank you for the info. I returned the WE826-T and ordered another. I'll test with a nano on Standard adapter when it arrives.

Ok, so I'm brand new to this forum. I am moving to land next to the lake where satellite is my only option, however I am very close to T-mobile, Verizon, and somewhat close to ATT tower. I found this forum after researching unlimitedville, and began to slowly realize that it appears people are or ...

Awesome, that sounds great, I'll email them. Thanks so much for responding, I've seen your name in so many of the threads, so thanks again for being so willing to help, you are the man!

In case anyone needed yet another reason to switch to Voxel and completely disable Circle, it looks like security researchers finally started exploiting ‘circled’ much as I did for my CJ implementation. Only difference being the remote attack vector of uploading malicious code into the unencrypted Ci ...

Didneywhorl wrote: ↑Tue Sep 21, 2021 9:02 am All great info, but I meant which firmware on the router.

GoldenOrb_2021-09-13 ( WiFiX-WG1608-GO2021-09-13a.zip ) which I got from the Google Drive link on https://thewirelesshaven.com/wifix-router-firmware/. As of today it still appears to be the latest wifix version offered

Didneywhorl wrote: ↑Sun Mar 28, 2021 2:59 pm Quectel likes to omit commands that were previously established, yet still supported. Sometimes you have to find a special manual, or look through the older ones.

Noticed this. Also docs have omissions and inaccuracies. But they're still helpful.

TIL about DHCP location which I hope to use to wrongly assert my location.

How is it connected to the RBM33G? Did you install in one of the internal slots or did you connect via usb port? I think I ended up running mine in the pcie slot closest to the outer edge of the board. If you want usb3 speeds you will have to run it via usb port as the pcie ports are usb2 at best ...

1; How do I see what bands I'm currently on? echo -ne "AT+QCAINFO?\r\n" | microcom -X -t 1000 /dev/ttyUSB2 2: What's the telnet command for changing the bands? Since the access method depends on your firmware and settings (telnet OR ssh), not a "telnet" command per se, but rather one of the device ...

OK, all seems well now. I have a working unlimited AT&T tablet plan SIM and I'm getting similar speeds on 3 different devices, a TP-link Archer C7v5, a MikrotikRBM33g, and an RBM11G, all on latest Rooter pre-release build (from 9/17). I don't know if it was equalizing the builds on the units, or ...

Edge is a slower fallback service, think of it like fallback from LTE to 3g they just call it Edge for when solid service on the normal platform is very weak it will fallback to the next best service it can authenticate on.

I switched from an EP06 to an EM12 and although I'm not seeing much faster speeds, it has been pretty stable the last few days. No disconnects in about 3 days. I have mine in a USB with GL-1300 router.

ok... https://www.vpnunlimited.com/help/manuals/how-to-manually-create-vpn-conf In step one pick the manually create new device Step 2 just pick a server you want to use. I would just pick one in the USA Step 3 In this document I dont see a choice for wireguard let me know if when you are doing this ...

The 2nd we826t arrived. It does not detect a nano Sim on Standard adapter, i.e. 1st and 2nd we826t are same in terms of Sim detection.
I'll return the 2nd too.
Thank you anyway.

A basic scanner run was completed. I mostly capture LTE and NSA RSRQ, RSRP, and SINR metrics from the serving cell command. The CA commands don't include NSA metrics (and require loading the connection) so I didn't try visualizing CA. Command to control the Green Heron RT-21 controller: rotator.py ...

So I finally got an M2000b (T-Mobile) device, I have been working on it and I must say it is a pain in the *ss to work on from a developer standpoint. I have managed to get Verizon (M2100) firmware loaded to the M2000b T-Mobile model, thus unlocking it and making it a Verizon model, I will post a ...

I've recently completed a cellular data rig with an RM502Q-AE as the centerpiece mounted in an AD4M 1DP738X8 RJ antenna and connected to a Raspberry Pi 4. More details on the modem and tower construction can be found here: https://twitter.com/peterastephens/status/1424591177458794496 The antenna is ...

Would think

about using PoE
Power over ethernet and an enclosure for the MoFI.

Keep your antenna cable very short and cheap. LMR400

Use cat6a or cat7 cable for the data

That sierra module in it is qualcomm, so ipv6 is master controlled by the nv item 1896 or 0x0768 so set the first 2 bytes to 01 for enable ipv6 or 00 for disable. it cannot use ipv6 if that nv is set to 00, now if you set it to 00 you will not have data services if that apn is set to ipv6 so to ...

[*] Should I reset the modem after changing the heading (AT+CFUN=1,1) or will the modem settle on a new better cell eventually by itself? I want to avoid having the modem stuck to an inferior but useable cell because then I won't have accurate metrics for that heading. [*] Will 4x4 MIMO only kick ...

Fyi Only need a friend with an address with service. Have the modem ship to that address and setup auto pay The modem is not locked to address. :roll: This was genius... I just ordered it. They only need the address to verify service, but they were still willing to send it to my address. So I ...

Awesome work Rich. Is it safe to assume you can flash an AT&T 5g phone imei to a M2100 to make it think it is a 5g phone. Also does the M2100 flash to a M2000 still allow the M2000 to function with the original M2000 bands? (Ie band 71). I'm thinking about a M2100 flashed to 5g phone imei for at&t ...

I would do a factory reset the put back just the apn and ttl settings, nothng else. That should get you back to working, At that point we can try and tackle the vpn again if you choose.

Thanks, you folks have been very helpful.

Well satellite will ALWAYS have very bad latency its just part of how satellite works. As far as your setup I think we are at the point of the old adage "If it aint broke dont fix it" :) Congrats you are now to the point you shoudnt have to worry about these things anymore and just use it.

I don't know if NordVPN does this but by far the easiest way to setup WireGuard is when the VPN provider supplies a config file. That's how I use Windscribe. One of the download options is a config generator which provides a file which you upload to the router. There was no real config to do. The ...

M1 NightHawk Netgear TTL, Bypass T-Mobile Hotspot Throttle to get Unlimited LTE Hotspot See YouTube Link: https://youtu.be/yjamCF4dGCQ 1. The Hotspot device/Router MUST have APN set to: fast.t-mobile.com (many devices I've seen that you can change the APN and it will show its selected, but yet still ...

far as i know the "conventional router" would have to be running some form of goldenorb to be able to use the usb/modem card.

I have had my wg3526 running over a year 24/7 and no issues.

All of your above research is correct, though we do not talk details about changing imei in here as TECHNICALLY its illegal to be doing that. From my limited knowledge you will need to reseach the exact At command on your own but the quectel modems are the easiest to do this on while the sierra ...

I am looking for recommendations for a router that can hide tethering from AT&T in the US. I have an unlimited account but tethering is limited to a certain amount of data per month. Here are my requirements: 1. That the router be able to hide tethering from AT&T. 2. That doing so is easy. This is ...

Hello, This decision by AT&T is just to reduce their support call volume. The redress depends on what legal constructs you have available in your state. My neighbors and I are in California, and have filed disputes citing SB 822: AT&T (or any other carrier) is not allowed to exclude a device that is ...

Hello, ... Hello back, My location is Arkansas so California law does not help although I appreciate the Information. I have bought a Device that will work and meets requirements (Netgear Mr1100) so my issue is settled. Hope you folks in California are successful in bringing AT&T to heel since that ...

Good Afternoon! First I want to thank everyone for your posts and assistance. They have helped so much on my build. With that said, I do have an issue that i am hoping someone can help. I have a WG3526 from The Wireless Haven with a EM160 PoE in a The Wireless Haven 4x4 Mimo enclosure. This setup ...

Thanks, I have always been a big fan of having spare stuff. Usually if you have a spare you never need it!

I have the calyx. It was getting sprint up until about a month ago. Now it’s showing T-Mobile. I read somewhere that august 2021 they were switching over all towers to T-Mobile.

Definitely do it. It’s by far the best deal.

AWESOME! Back in Business!

@Didneywhorl Thank you so much!!!!

I knew it had to be some switch or button to change it.

I think you will find that traveling full time in a RV with wife and 3 children will provide you with many limitations besides Internet access. We have anything and everything you could think of to sustain off grid, or otherwise....have spent over $5k in accessories to prepare.....the only unsolved ...

echo -ne "AT+QCAINFO?\r\n" | microcom -X -t 1000 /dev/ttyUSB2 ... I also have a few points on my own to all of you: Somehow, the cell lock behaviour is quite strange in my case. When I lock it to one only, I partly still end up with CA enabled (as far as I can tell): root@LBR20:~# echo -ne "AT ...

There is no bridge mode, for all practical purposes, on the LBR20. This is true. The real question becomes 'Why do you require a bridge?'. For most folks, the answer is usually "Because I need open NAT for gaming / running a server / torrenting.' In that case, bridging 'wwan0' from the modem to ...

Is there an error log somewhere after getting error sending AT commands? Unfortunately, no; at least not easily accessible outside of the modem's internal logging. But, even if such a log existed that we could access from the LBR20 itself, it would likely not provide anything more verbose than the ...

The problem with booster are the also Amplify the noise so you’re Signal to noise ratio sucks.

Would be better to put your money in good quality cables and antennas.

It would be helpful if you shared your Signal numbers.

I followed a couple other forum tutorials, and I think I'm good. I'm running at about 30mb up and down.

LoveMeSomeCALTE wrote: ↑Thu Oct 07, 2021 12:24 pm I really hope T-Mobile keeps up with the demand.

Don't tell any one

.... Too late we just did

SSH tunnel over a public VPS - or use something like ngrok.

Things change, but in general it wasn't necessary to overcome hotspot data limits, as ATT seemed to use APNs for data use channeling. Not really sure to be honest, outside of that. Hey, Thank You for responding! So, AFAYR, modifying the Hop Limit field in IPv6 header wasn't necessary but also didn ...

ok yeah i think i remember this now from earlier in this thread. Since you already have a 75 ohm booster and its working I would do like I have in my home and have 2 seperate systems. A booster for phone use (use your 75 ohm booster system) A router for internet, in my case a wg3526 with an EP06-A I ...

Search found more than 1368 matches