I have placed an order for the Telit LM960 CAT 18. In looking at the specs I cannot determine what cabling hardware I need. I looks like there are 5 antenna ports. I am a total noob so I don't know what I need to go from the card to the enclosure for the antennas to hook to. I am certain I can solve that. I am no so certain I can solve what antennas I need to make this thing jam. Still reading but any assistance is appreciated.
Ty
Telit LM960 question
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
lteoptions
- Posts: 5
- Joined: Tue Mar 10, 2020 7:51 pm
- Has thanked: 0
- Been thanked: 1 time
-
BillA
- Posts: 1230
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 219 times
- Been thanked: 327 times
- Contact:
Re: Telit LM960 question
lteoptions wrote: Wed Mar 11, 2020 11:43 pm I have placed an order for the Telit LM960 CAT 18. In looking at the specs I cannot determine what cabling hardware I need. I looks like there are 5 antenna ports. I am a total noob so I don't know what I need to go from the card to the enclosure for the antennas to hook to. I am certain I can solve that. I am no so certain I can solve what antennas I need to make this thing jam. Still reading but any assistance is appreciated.
Ty
You can run it with just 2 antennas (Main-1/Diversity-1), but to get the full 4x4 MIMO performance you need to connect the additional two (Main2/Diversity-2) antennas. That modem uses the small IPEX MHF4 connectors.
