WE826 Not Working
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
GrandPooh-Bah
- Posts: 50
- Joined: Mon Jan 06, 2020 8:32 pm
- Has thanked: 0
- Been thanked: 4 times
WE826 Not Working
It started with me changing the SSID and password and has morphed into a router that does not respond at all. No WiFi, No Ethernet and if I power off and re-power with the reset button held I get a fast flashing WiFi light that stops after a while and it ends with the red power light and blue USB light on. I even tried removing the modem and reset the router with the same results.
-
terryjett
- Posts: 404
- Joined: Tue Sep 24, 2019 10:42 pm
- Location: Far Side
- Has thanked: 104 times
- Been thanked: 91 times
- Contact:
Re: WE826 Not Working
If this is the same problem you reported here https://wirelessjoint.com/viewtopic.php?f=12&p=6000#p6000
I would follow @steveg advice and use the link provided.
Had same issue after failed attempt when updating GoldenOrb. My WE826 was acting exactly as you describe. Took me 4-5 tries to get my timing right (ping method), but got back into WE826, updated firmware and all good.
Can be very frustrating, so would start the process with a fresh mind
I would follow @steveg advice and use the link provided.
Had same issue after failed attempt when updating GoldenOrb. My WE826 was acting exactly as you describe. Took me 4-5 tries to get my timing right (ping method), but got back into WE826, updated firmware and all good.
Can be very frustrating, so would start the process with a fresh mind
