Mikrotik RMB11G Goldenorb 19.07.06 "can't open dev/ttyUSB1"

[supersailor89]

i flashed golden orb to the RBM11G, inserted the modem Quectel ec25af, i get the modem present not connected, and on the Network status it says " can't open device dev/ttyUSB1".

Under # sys/class/tty i only see TTYs1-3 and ttyUSB0. no other ttyusb how do i change it to look at usb0 and not 1?

[punkguy00017]

Need to change it to mbim

[Didneywhorl]

i flashed golden orb to the RBM11G, inserted the modem Quectel ec25af, i get the modem present not connected, and on the Network status it says " can't open device dev/ttyUSB1".

Under # sys/class/tty i only see TTYs1-3 and ttyUSB0. no other ttyUSB how do I change it to look at usb0 and not 1?

Set it to USBtty0 maybe, but honestly there should be more than one there.

Screenshot 2021-11-06 105651.png

Use the VID and PID of your modem. You can find them on the debug screen if you dont know them.

I'd set both the pp and comm port to the same port, especially since its all you have there.

[dieselfumes]

Can't open device /dev/ttyUS Can't open device /dev/ttyUS
Comm Port : /dev/ttyUSB1

I can't get the modem to connect. EC25-AF
I hoping someone has this figured out.