Hi All,
Hoping someone can help me out here. I started out using a Wilson Outdoor directional panel on my roof but I wasn't able to get a strong enough signal. So I upgraded to this WideAnt2-X. I was pulling speeds around 10-15 mbs over the past few months but that has been dropping to below 5 consistently now and I'm not sure why or how to improve it. Have a few hills and some trees between me and the nearest tower 2.5 miles away. Any advice on how to increase my speeds? Screenshots of my stats are below.
Mofi 3500 w WideAnt2-X
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
OrganicMichigan
- Posts: 2
- Joined: Tue Jan 19, 2021 10:04 am
- Has thanked: 0
- Been thanked: 0
Mofi 3500 w WideAnt2-X
You do not have the required permissions to view the files attached to this post.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Mofi 3500 w WideAnt2-X
Being on a 5Mhz band (your B12) may be the first issue with speed, and you may also be on a congested tower. Try locking it out of Band 12. Your signal could be stronger, but it seems ok. Doesnt really look noisy. I like the SINR value for that, over RSSI or RSRQ.
I think the AT terminal command AT!GSTATUS? will get that command for you.
I think the AT terminal command AT!GSTATUS? will get that command for you.
-
OrganicMichigan
- Posts: 2
- Joined: Tue Jan 19, 2021 10:04 am
- Has thanked: 0
- Been thanked: 0
Re: Mofi 3500 w WideAnt2-X
Thanks for the response. Have to admit I'm a bit of a newbie so I'm not sure what the last part re SINR means!
I see I can bandlock on one band but how do I exclude just band 12?
I see I can bandlock on one band but how do I exclude just band 12?
