Factory reseting mc7455 modem?
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
- Posts: 7
- Joined: Sat Jan 04, 2020 3:35 pm
- Has thanked: 0
- Been thanked: 0
Factory reseting mc7455 modem?
Ive had it with the droping issues so i looked into fixing this problem quite blindly. Knowing it would be a hassel if i made a mistake... so here i am.
Firstly i rebooted the modem not sure what that did
Secondly i factory reset the modem which is where i think i screwed up. (I paid to have the generic firmware upgraded but it says i should reflash it twice after factory reseting with at! Commads
Then i flashed the shit out of the router.
hours after all that im giving up troubleshooter is fine i know at!cnum/pin are ok and gstatus tells me its registered and low connection but no SCC's
I would think the mc7455 is usable at its basic firmware but i guess not. Also somwhere i read that the em7455 cant be rolled back so i would hope the same applies to the mc 7455.
Well guys its the white flag for me gunna get some rest thank you in advance for reading
Fyi Im using a WE-1026 firmware 2020301
Firstly i rebooted the modem not sure what that did
Secondly i factory reset the modem which is where i think i screwed up. (I paid to have the generic firmware upgraded but it says i should reflash it twice after factory reseting with at! Commads
Then i flashed the shit out of the router.
hours after all that im giving up troubleshooter is fine i know at!cnum/pin are ok and gstatus tells me its registered and low connection but no SCC's
I would think the mc7455 is usable at its basic firmware but i guess not. Also somwhere i read that the em7455 cant be rolled back so i would hope the same applies to the mc 7455.
Well guys its the white flag for me gunna get some rest thank you in advance for reading
Fyi Im using a WE-1026 firmware 2020301
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
-
- Posts: 7
- Joined: Sat Jan 04, 2020 3:35 pm
- Has thanked: 0
- Been thanked: 0
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Factory reseting mc7455 modem?
Give us the output of AT!GSTATUS? In the AT Command terminal, please.
-
- Posts: 7
- Joined: Sat Jan 04, 2020 3:35 pm
- Has thanked: 0
- Been thanked: 0
Re: Factory reseting mc7455 modem?
at!gstatus?
!GSTATUS:
Current Time: 119579 Temperature: 42
Reset Counter: 3 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B4 LTE bw: 15 MHz
LTE Rx chan: 2225 LTE Tx chan: 20225
LTE CA state: NOT ASSIGNED
EMM state: Registered Normal Service
RRC state: RRC Idle
IMS reg state: No Srv
PCC RxM RSSI: -85 RSRP (dBm): -121
PCC RxD RSSI: -80 RSRP (dBm): -111
Tx Power: 0 TAC: 9612 (38418)
RSRQ (dB): -12.3 Cell ID: 05D36818 (97514216)
SINR (dB): 4.4
OK
!GSTATUS:
Current Time: 119579 Temperature: 42
Reset Counter: 3 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B4 LTE bw: 15 MHz
LTE Rx chan: 2225 LTE Tx chan: 20225
LTE CA state: NOT ASSIGNED
EMM state: Registered Normal Service
RRC state: RRC Idle
IMS reg state: No Srv
PCC RxM RSSI: -85 RSRP (dBm): -121
PCC RxD RSSI: -80 RSRP (dBm): -111
Tx Power: 0 TAC: 9612 (38418)
RSRQ (dB): -12.3 Cell ID: 05D36818 (97514216)
SINR (dB): 4.4
OK
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Factory reseting mc7455 modem?
What router is this in?
Two things.
1: There is a variance in your main and aux antenna, not much but may need to look into the connectors and make sure nothing is loose or grounded slightly by touching mounting screws.
2: Your signal numbers are garbage. You are BARELY connecting.
Besides barely being connected and there being a variance in the two antennas it IS connected to the att network.
Two things.
1: There is a variance in your main and aux antenna, not much but may need to look into the connectors and make sure nothing is loose or grounded slightly by touching mounting screws.
2: Your signal numbers are garbage. You are BARELY connecting.
Besides barely being connected and there being a variance in the two antennas it IS connected to the att network.
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Factory reseting mc7455 modem?
You also prob need to return your SIM card to its original device, a phone? And get it to communicate, then try the modem again.
What type of account is this from? AT&T is getting more restrictive with their accounts.
What type of account is this from? AT&T is getting more restrictive with their accounts.
-
- Posts: 7
- Joined: Sat Jan 04, 2020 3:35 pm
- Has thanked: 0
- Been thanked: 0
Re: Factory reseting mc7455 modem?
Ok yeah so I switched routers back to the good ole att ZTE hotspot. Works fine with that.
I imagine if I reflashed the mc7455 i maybe able to get back to connectivity with the WE-1026
I imagine if I reflashed the mc7455 i maybe able to get back to connectivity with the WE-1026
- Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Factory reseting mc7455 modem?
I think ATT sees the imei changed and shut it down. They are getting like that lately