WG3526-P POE question

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
docderwood
Posts: 56
Joined: Wed May 06, 2020 12:48 pm
Has thanked: 33 times
Been thanked: 4 times

WG3526-P POE question

Post by docderwood »

Tried to search....suspect the answer is out there somewhere....

Dumb question: I have this router working great via POE. I've got outdoor ethernet ran to the roof and will soon move it to the roof. I made the assumption that the router could be powered via a single ethernet run to the roof AND that this same single ethernet cable could be connected to my LAN via this same cable so the router can assign IP addresses to the LAN etc?

Currently I can only get my computer to pull an IP address from the router if I plug it into a LAN port or use WIFI...not if I move the computers ethernet to the POE injector.

Do I need to reconfigure the POE port/WAN port on the router?

Thanks!
Top
User avatar
JimHelms
Site Admin
Posts: 1366
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Has thanked: 79 times
Been thanked: 199 times
Contact:
Contact JimHelms

Re: WG3526-P POE question

Post by JimHelms »

Try THIS
Top
Post Reply

Return to “General and Unclassified”