Wireguard VPN Bypass
Forum rules
Use the SEARCH function for related issues PRIOR to posting for assistance.
Use the SEARCH function for related issues PRIOR to posting for assistance.
Wireguard VPN Bypass
I am currently connected to a VPN using wireguard but I am having trouble trying to bypass it on one local ip address. I am not sure if there are more settings I need to change as well.
You do not have the required permissions to view the files attached to this post.
-
BillA
- Posts: 1223
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 218 times
- Been thanked: 325 times
- Contact:
Re: Wireguard VPN Bypass
That should be it for a local IP, just test it to make sure it's actually excluded.
Re: Wireguard VPN Bypass
To bypass a VPN on a specific local IP address while using WireGuard, you can follow these general steps:
Identify Local IP Address:
Determine the local IP address you want to bypass the VPN for.
Edit WireGuard Configuration:
Locate your WireGuard configuration file on your device.
Exclude Local IP Address:
Inside the configuration file, find the [Peer] section corresponding to the VPN server you are connected to.
Add the AllowedIPs parameter, excluding the local IP address you want to bypass
Keep in mind that the exact steps might vary depending on the WireGuard client or application you are using
Identify Local IP Address:
Determine the local IP address you want to bypass the VPN for.
Edit WireGuard Configuration:
Locate your WireGuard configuration file on your device.
Exclude Local IP Address:
Inside the configuration file, find the [Peer] section corresponding to the VPN server you are connected to.
Add the AllowedIPs parameter, excluding the local IP address you want to bypass
Keep in mind that the exact steps might vary depending on the WireGuard client or application you are using
-
BillA
- Posts: 1223
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 218 times
- Been thanked: 325 times
- Contact:
Re: Wireguard VPN Bypass
Freya23 wrote: ↑Wed Feb 21, 2024 3:52 am To bypass a VPN on a specific local IP address while using WireGuard, you can follow these general steps:
Identify Local IP Address:
Determine the local IP address you want to bypass the VPN for.
Edit WireGuard Configuration:
Locate your WireGuard configuration file on your device.
Exclude Local IP Address:
Inside the configuration file, find the [Peer] section corresponding to the VPN server you are connected to.
Add the AllowedIPs parameter, excluding the local IP address you want to bypass
Keep in mind that the exact steps might vary depending on the WireGuard client or application you are using
Wouldn't the GUI exclusion entry work as referenced by the OP, without having to edit files?
