Hello
I would like to connect by ADB to my T99W175 x55 modem connected by PCI, but `adb devices` show nothing on the IP address of wwan0.
Should I use a specific address? I though adbd was listening on 0.0.0.0:5555
I would be interested in any solution.
Also, has anyone attempted tweaks like https://blog.cacombos.com/2020/11/12/en ... mm-device/ or https://mt-tech.fi/en/enable-all-availa ... mm-device/ to enable at least 256QAM UL?
Thanks!
How to enable telnet or ADB on the Foxconn T99W175 5G WWAN
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: How to enable telnet or ADB on the Foxconn T99W175 5G WWAN
Could be wrong but I always looked for adb on serial COM ports (USB), versus TCP/IP ports. I'm super not versed in ADB stuff though, so... /2cents.
