Cudy LT-500 Selecting Network Operators

[87jacobsen]

Hello,

1st post, but been doing a ton of reading on the site. I own a cudy lt500 with an att prepaid unlimited sim. I'm actually in Canada, and ATT allows roaming on any of the major Canadian networks.

The problem - My cudy lt500 always wants to connect to Rogers, despite Bell performing much better in my area. I don't see any way to set a preferred network operator in the cudy UI, unless I am missing a hidden menu.

Is there a way to do this AT+ commands?

Greatly appreciate any help. It's frustrating because the Rogers network gives me 3 mb down and bell gives me 60 in my area... But the router seems to default to Rogers 90% of the time. Would LOVE some help in how I can force the router onto certain networks only when needed.

Thanks!

[fratermus]

I don't see anything in the menus, but they are squirrelly and poorly documented. You might email support@cudy.com; IME they answer within a couple business days after accounting for time zone.

If you find out please report back so we all know.

[DDK65JAG]

Have you tried locking the modem to Bells bands? Seems like using APNs may be too
complicated due to the roaming.