Wireless Joint

Hmm, thats a good thought on the firmware, as I'm currently running; 1.8.8-20210531-131411

How are you staying up to date with the firmware releases? Does CUDY have a firmware updates page I could check periodically?

Feeling a little gun-shy on updating, based on your mention of the latest not ...

Circling back around here, after a few months of usage with the new firmware, and I have to say: GOD DAMN my connection is rock solid now! Thank you thank you!

Tried no change, I think i just got a bad router, tried a netgear LM1200 and connected fine, Cudy refunded my $$ and told me to keep it
Whats the command for QMI? AT+QCFG="usbnet",0?

ChrisW wrote: Thu Dec 16, 2021 5:36 pm Tried no change, I think i just got a bad router, tried a netgear LM1200 and connected fine, Cudy refunded my $$ and told me to keep it
Whats the command for QMI? AT+QCFG="usbnet",0?

yep except no ? mark

fratermus wrote: Thu Jul 28, 2022 3:04 pm

NathaliaBerm wrote: Thu Jul 28, 2022 11:20 am I am trying to configure my LT500 as a wireless bridge.

look at

Code: Select all

General Settings | WISP

Alright! Confirmed and super easy. Thanks for the assist!

Cudy has a new LT500 D model. Now has removable LTE antennas and a nanosim slot. Big improvements over the older LT500

Beware that if you order a Cudy 5G P5 router at the moment you may receive an inferior X55 modem and not the X62 that is advertised.

I've attached the advertisment, noting an X62.

Here's the response from Cudy support.

Sorry for the late reply. The P5 had changed the module in 2023 and at the ...

Hi everyone,

I have recently configured a mobile internet setup using a USB-tethered Visible Wireless cellphone hotspot, a travel router, and TTL mangling to get unlimited, unthrottled internet in my apartment. Having used it for approximately a month now, I wanted to post my solution to get this ...

I can confirm wifi is working on my Beryl MT1300 with GoldenOrb 2022-10-26 (openwrt 19.07.7)

Have you tried locking the modem to Bells bands? Seems like using APNs may be too
complicated due to the roaming.

There is much generalization that unfortunately is common. The RM520N-GL is more capable than the others, as far as a gateway modem function is concerned. How it is used in the host system it is in will determine how it compares in performance to other systems.

If you had a Cudy LT18 and swapped ...

The fix for my problem was that t-mobile changed something where they started denying service if the IMEI was not the IMEI of the supplied hotspot. Magic was done on the Cudy and it instantly worked.

After trying everything imaginable, I turned focus to a hardware issue. I disassembled the router and removed the modem from the Mini PCIe slot. Cleaned the leads with some contact cleaner and reconnected. Low and behold the SIM registered. It's been running this morning with no issues so far.