How to set up NEXQ6GO-M to failover from copper to cellular?
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
How to set up NEXQ6GO-M to failover from copper to cellular?
Hey guys I'm wanting to set up my NEXQ6GO with failover and I'm just not understanding how. I have Windstream cable but would like it to failover to wireless because Windstream is not reliable at the best of times... Could anyone here help me with this? I'm sure I'm just not understanding something small. Currently, it defaults to Cellular but would like it to default to copper and then fail over to cellular if need be.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: How to set up NEXQ6GO-M to failover from copper to cellular?
Good video here:
You will need MWAN3. If that is not in your firwmare build, you can try and add it, or if that fails ask wireless haven for a version with MWAN3 in it, or ask the Rooter guys for a version of firmware that works with your router with MWAN3 already in there: https://forums.whirlpool.net.au/thread/ ... =-1#bottom
You will need MWAN3. If that is not in your firwmare build, you can try and add it, or if that fails ask wireless haven for a version with MWAN3 in it, or ask the Rooter guys for a version of firmware that works with your router with MWAN3 already in there: https://forums.whirlpool.net.au/thread/ ... =-1#bottom
