Trying to update firmware on a WG3526P
Current version is GoldenOrb_2020-03-01
Tring to load WiFiX-NEXP1GO-GO2021-09-11a
I get image “file does not contain a supported format” error.
Per the relase notes it talks about how this could happen.
And you may need to do a force load.
My question is how to do a force load?
Firmware WG3526P Force Load
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Firmware WG3526P Force Load
You do not have the required permissions to view the files attached to this post.
-
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Re: Firmware WG3526P Force Load
I found the trick on how to force load on YouTube.
Note the LED did not flash as shown, but I did not have a modem
installed. That maybe the difference.
See link for clues
Off to the LTE Fix store to do some shopping for a modem
https://thewirelesshaven.com
I am thinking of getting the
Sierra Wireless MC7411 CAT-7 LTE-Advanced Modem
Band 71 is important to my sitting
Are there any other modems to look at that have Band 71 for T-Mobile ??
Note the LED did not flash as shown, but I did not have a modem
installed. That maybe the difference.
See link for clues
Off to the LTE Fix store to do some shopping for a modem
https://thewirelesshaven.com
I am thinking of getting the
Sierra Wireless MC7411 CAT-7 LTE-Advanced Modem
Band 71 is important to my sitting
Are there any other modems to look at that have Band 71 for T-Mobile ??